JVC HR-VP638U, Instructions Manual

Page: 30 / 64

30
PLAYBACK AND RECORDING FEATURES (cont.)
Instant ReView
At the press of a button, you can power up your VCR, rewind the
tape and begin viewing the most recent timer-recorded program.
ACTIVATE INSTANT REVIEW
1
After ensuring that the VCR is off and the Timer mode is
disengaged, press REVIEW.
●
The power comes on and the VCR searches for the
index code indicating the start of the last timer-recorded
program, then begins playback automatically.
●
You can access a program 2–9 index codes away
from the current position on the tape. If, for example,
you have 5 programs recorded and you want to
watch the third one, press REVIEW three times.
●
To find the very beginning of the desired program,
press REW or FF and search visually for the program’s
start point.
RESET COUNTER TO ZERO
1
Press C.RESET.
NOTE:
By pressing the DISPLAY button, you can change the
display to show the counter reading, channel number
or clock time. (Channel number is not displayed during
playback.)
Counter Memory
When activated, this feature returns the tape to counter position
“zero”.
ACTIVATE COUNTER
MEMORY
1
Press C.RESET during playback at a point you want to have
quick access to later. The counter reads “0H 00M 00S”.
Then press C.MEMORY. The Counter Memory indicator
in the front display panel lights.
RETURN TO COUNTER
POSITION ZERO
2
Press STOP (during playback), then press REW. The
tape rewinds and stops at approximately “0H 00M 00S”
automatically.
●
To cancel Counter Memory, press C.MEMORY.
Counter Reset
1 2
4 5
3
6
8
0
7 9
6
q
DISPLAY
FF
REW
C.RESET
STOP
STOP
REVIEW
REVIEW
C.MEMORY