JVC HR-VP638U, Instructions Manual

Page: 11 / 64

11
6
q
1 2
4 5
3
6
8
0
7 9
CH
MENU
SHUTTLE PLUS
SELECT D.S.T. MODE
9
You have three choices:
a–Select “AUTO” and the
adjustment to your VCR’s
clock will be made
according to the incoming
signal from the host
channel.
b–Select “ON” and the
adjustment will be made
based on the clock itself.
c–Select “OFF” if Daylight Saving Time doesn’t apply to
you.
Place the arrow next to your choice by pressing CH
5∞
or SHUTTLE PLUS
5∞
, then press MENU and the
Semi-Auto Clock Set screen reappears.
**AUTO DAYLIGHT SAVING TIME
This function enables automatic adjustment of the VCR’s
clock at the start and end of Daylight Saving Time.
With Auto DST activated, . . .
. . . on the first Sunday of April at 2:00 AM, the clock is
adjusted to 3:00 AM.
. . . on the last Sunday of October at 2:00 AM, the clock is
adjusted to 1:00 AM.
SELECT MODE
5
At the Override Auto Clock Set screen, place the arrow
next to "AUTO CLOCK SET" by pressing CH
▲▼
or
SHUTTLE PLUS
5∞
, then power off the VCR. Do not
power it on again until the clock has been adjusted.
The clock is automatically adjusted on the hour except
at 11:00 PM, midnight, 1:00 AM and 2:00 AM.
D.S.T. SELECT
=
AUTO
ON
OFF
PRESS (
5
,
∞
) TO SELECT
PRESS (MENU) TO END
IMPORTANT
After setting the Semi-Auto clock set, make sure that the VCR
is off before the next hour so that the clock can be adjusted.
(The clock is automatically adjusted on the hour except at
11:00 PM, midnight, 1:00 AM and 2:00 AM.)
SELECT MODE
5
At the Override Auto Clock Set screen (
Z
pg. 10), place
the arrow next to “MANUAL CLOCK SET” by pressing
CH
▲▼ or SHUTTLE PLUS
5∞
, then press OK.
SET DATE, TIME AND D.S.T.
6
The Manual Clock Set
screen is displayed and the
first setting that can be set
begins flashing.
Press the appropriate
NUMBER keys to set the
date and time (if only 1
digit, press "0" first). Press
CH
▲▼
or SHUTTLE PLUS
5∞
to set AM/PM and D.S.T. (Daylight Saving Time) to
“ON” (automatic adjustment based on VCR’s clock) or
“OFF” (if D.S.T. doesn’t apply to you).
Press OK after AM/PM and D.S.T. settings. The next
setting that can be set begins flashing. When you’re
finished with this set-up procedure, press MENU to start
the clock.
NOTE:
CH
5∞
and SHUTTLE PLUS
5∞
can be used to perform
all operations. (In this case, press OK after each setting.)
MAKE CORRECTIONS
7
To change any of the settings, press OK or SHUTTLE
PLUS
™ £
until the item you want to change
blinks, then set as in step 6.
MANUAL CLOCK SET
DATE 1/ 1/96 MON
TIME – – : – – AM
D.S.T. ON
PRESS NUMBER KEY(0-9)
OR (
5
,
∞
), THEN (OK)
PRESS (MENU) TO END
Manual
Auto
NUMBER
OK
CH
MENU