JVC HR-V610AH Instructions Manual Download

Page: 6 / 16

Page 6

June 9, 2004 1:32 pm

— 6 —

Playback Features

Adjusting tracking condition
— tracking adjustment

Automatic tracking adjustment

Whenever you insert a tape and start playback, automatic tracking
starts working and continuously analyzes the signal to enable
optimum picture quality during playback.

Manual tracking adjustment

If automatic tracking cannot eliminate noises well during
playback, follow the procedures below.

Press

on the remote control during playback to activate

manual tracking.

Press

and

–

to eliminate the noises. Press it briefly for a

fine adjustment, or press and hold for a coarse adjustment.

●

Press

again to reactivate automatic tracking.

Soundtrack Selection

Your recorder is capable of recording three soundtracks (HI-FI L,
HI-FI R and NORM) and will play back the one you select.
Pressing

AUDIO

changes the soundtrack being played back as

follows:

HI-FI:

Normally select this. Hi-Fi sound is played back.

HI-FI L:

Sound on the left Hi-Fi channel is played back.

HI-FI R:

Sound on the right Hi-Fi channel is played back.

NORM:

Sound on the normal track is played back.

NORM HI-FI:

Both sounds on the Hi-Fi track and normal track are

mixed and played back.

NOTE:

The above indication appears when “O.S.D.” is set to “ON”
(

10), though the monitor sound changes in sequence.

Automatic operations after rewinding
— Next Function Memory

The Next Function Memory “tells” the recorder what to do after
rewinding is complete. Ensure that the recorder is in stop mode.

●

For Automatic Playback Start

Press

, then press

within 2 seconds.

●

For Automatic Power Off

Press

, then press

within 2 seconds.

●

For Automatic Timer Standby

Press

, then press

within 2 seconds.

NOTE:

It is not possible to select the Automatic Timer Standby function if
the cassette’s record safety tab is removed.

Playing back tape repeatedly (100 times)
— Repeat Play

During playback, press and hold

for more than 5 seconds. The

play indicator (

) on the display panel starts blinking slowly. To

stop playback, press

on the remote control or

on the

recorder.

NOTE:

Pressing

also cancels repeat playback.

Locating beginning of recordings
— Index Search

Index codes are placed on the tape at the beginning of each
recording when recording on this recorder.

While the tape is not running, press

on the

remote control to start search.

To access a recording of 2 to 9 index
codes away, press

repeatedly until the correct number is
displayed on the screen (only if
“O.S.D.” is set to “ON” (

10)).

Playback begins automatically when
the desired recording is located.

Locating beginning of timer recordings
— Instant Review

After ensuring that the recorder is turned off and that the timer
mode is disengaged, press

REVIEW

on the remote control.

●

The recorder turns on, and rewinds to the index code indicating
the beginning of the last timer-recorded program, then begins
playback automatically.

●

You can access a program of 2 to 9 index codes away from the
current position on the tape. If, for example, you have
5 programs recorded and you want to watch the third one, press

REVIEW

three times.

●

The Instant Review function will also operate if the recorder is
turned on.

Skipping unwanted portions
— Skip Search

Press

30 SEC

on the remote control once to 4 times during

playback. Each press initiates a 30-second period of high speed
playback (up to 2 minutes). When the specified portion of the tape
is skipped, normal playback resumes automatically. To return to
normal playback during Skip Search, press

When the tape is not running

Rewind/fast-forward

Press

Eject the tape

Press

●

You can also eject the cassette when the recorder is turned off.

Turn off the recorder

Press

Reverse

Forward

Reverse