JVC HR-S9850EK, Service Manual

Page: 8 / 90

1-2
(L2b)
(L2c)
(L2a)
a<Note 2a>
(L2b)
CN3012
(L2a)
[2]
Front
panel
assembly
(S2a)
ADV. Jog board
assembly
WR2a
<Note 2b>
CN7004
WR2a
<Note 2b>
b<Note 2a>
Front panel
backside
Fig. D1 Fig. D3
Fig. D2
Fig. 1
Fig. 2
Fig. 3
(A)
(B)
Procedures for Lowering the Cassette holder assembly
As the mechanism of this unit is integrated with the Housing
assembly, the holder must be lowered and the two screws un-
screwed when removing the Mechanism assembly.
(S1a)
(S1a)
(S1a)
(S1b)
(S1c)
(S1c)
Bracket
[1] Top cover
[1]
Procedures for Lowering the Cassette holder assembly
(S3b)
[3]
Drum
assembly
CN1
CON1
WR3a
<Note 2b>
(L3a)
(L3b)
(P3)
Roller arm
assy
Inertia plate
(L3c)
WR3b
<Note 2b>
Cleaner assy
Not used
Not used
(S3a)
(S3c)
Drum shield
(S3d)
Note: When installing the Drum assembly, secure the screws
(S3a to S3c) in the order of a, b, c.
Turn the loading motor pulley in the direction as indicated by
Fig.2. As both (A) and (B) levers are lodged twice, push the
levers in the direction as indicated by Fig.3 to release them.
When pushing the levers, do it in the order of (A), (B), (B),
(A). When the holder has been lowered, turn the pulley until
the cassette holder is securely in place without allowing any
up/down movement.