Filename [HRS7950EU1a-EN.fm]
Masterpage:Left
18
EN
Page 18
March 6, 2002 1:21 pm
SAT CONTROL SET (cont.)
Setting satellite receiver's brand and
channel
After installation, set the satellite receiver’s brand and
channel correctly; otherwise, the Satellite Controller
cannot work correctly.
A
Turn on the satellite receiver.
Turn on the satellite receiver’s power.
B
Access the Main Menu screen on the
recorder.
Press
MENU
.
C
Access the Initial Set screen.
Press
rt
to move the highlight bar (pointer) to “INITIAL
SET”, then press
OK
or
e
.
D
Access the Sat Control Set screen.
E
Enter the satellite receiver’s brand.
F
Select the satellite receiver’s channel for
testing.
Turn on the TV and select the video channel (or AV
mode).
Press
rt
to move the
highlight bar (pointer) to
“SAT CONTROL SET”, then
press
OK
or
e
.
Press the appropriate
number
keys
to enter the brand code
from the list on page 19, then
press
OK
.
●
If the brand code you entered
is invalid, the code field will
be reset. Enter the correct
brand code again.
●
If the recorder is in playback or
recording mode, you cannot
set the brand code.
Press the appropriate
number
keys
to enter one of the
channel positions on the
satellite receiver, then press
OK
.
●
You can select the channel
position between 1 to 999.
●
After pressing
OK
, the recorder
enters the Test mode.
HRS7950EU1-EN.book Page 18 Wednesday, March 6, 2002 1:49 PM
