43
Repeat Playback
Your video recorder can automatically play back the whole tape
100 times repeatedly.
START PLAYBACK
1
Press
PLAY
.
ACTIVATE REPEAT PLAYBACK
2
Press
PLAY
and hold for over 5 seconds, then release.
●
The Play indicator (
) on the display panel blinks
slowly.
●
The tape plays 100 times automatically, and then
stops.
STOP PLAYBACK
3
Press
STOP
at any time to stop playback.
NOTE:
Pressing
PLAY
,
REW
,
FF
or
PAUSE
also stops Repeat Playback.
NTSC Playback
Your video recorder is equipped with NTSC circuitry that can
play back NTSC tapes.
LOAD A CASSETTE
1
Insert a cassette recorded in NTSC.
START PLAYBACK
2
Press
PLAY
.
●
"NTSC
→
PAL" appears on the screen for about 5
seconds.
●
Some TVs shrink the picture vertically and place
black bars at the top and bottom of the screen. This is
not a malfunction on the part of either the video
recorder or the TV.
●
The picture may roll up and down. This can be
corrected using the V-HOLD control found on some
TVs. (This cannot be corrected if the TV does not
have a V-HOLD control.)
●
The counter and tape remaining time readings will be
incorrect.
●
During search, still, or frame-by-frame playback, the
picture will be distorted, and there may be a loss of
colour.
●
Depending on the type of TV, the top and bottom
portions of superimposed displays may be cut off
during NTSC playback.
Retake
You can cut out unnecessary parts of a TV programme while
you're recording it.
ENGAGE RECORD-PAUSE
MODE
1
Press
PAUSE
during recording.
LOCATE START POINT
2
Turn the
JOG
dial to the left or right (or hold down
REW
or
FF
) and release it when you reach the point
where you want to resume recording.
* Your recorder returns to the Record-Pause mode.
RESUME RECORDING
3
Press
PLAY
when you wish to resume recording.
NOTE:
Retake function does not work during Direct Rec (
Z
pg. 11).
End of programme
Programme
Beginning of programme
Programme
Recorded part
Go back to end of programme to cut out
unnecessary part
Unnecessary
part
Unnecessary
part
