advanced features
39
Editing Using Another VCR
connect up
Connect the player’s 21-pin SCART connector to the recorder’s
21-pin SCART connector as illustrated.
A
When using your VCR as the player ...
... connect its
L-1 IN/OUT
connector to another VCR.
B
When using your VCR as the recorder ...
... connect its
L-2 IN/DECODER
or
L-1 IN/OUT
connector to another VCR.
set vcr’s input mode
The recording VCR mode must be set to
AUX
. If this
VCR is the recorder, press
AUX
and/or
PR
to select
L-1
(if you’ve used the
L-2 IN/
DECODER
connector) or
L-2
(if you’ve used the
L-1 IN/OUT
connector). If this
VCR is the player, set
O.S.D.
to
OFF
. (
墌
pg. 40)
set edit mode
See
Picture Control
on page 29
.
start source vcr
Engage its
PLAY
mode.
start recording vcr
Engage its
RECORD
mode.
NOTES:
• All necessary cables can be obtained from your dealer.
• For Y/C signal input/output, be sure to use a 21-pin SCART cable that is
compatible with the Y/C signal.
• When you set
PICTURE CONTROL
to
EDIT
to dub tapes (
墌
pg. 29), be sure to
select
AUTO
(or
NORM
when
B.E.S.T.
is set to
OFF
) after you finish dubbing the
tapes.
HR-S5965/5966EK-EN/p27-40
2/19/03, 04:10 PM
39