EN
33
1
2
3
4
5
6
7
8
9
0
2
4
1
You can use a camcorder as the source player and your video
recorder as the recorder.
Edit From A
Camcorder
MAKE CONNECTIONS
1
Connect the camcorder's AUDIO/VIDEO OUT connec-
tors to the recorder's front panel AUDIO/VIDEO input
connectors.
●
Use the L connector for monaural connection.
SET RECORDER'S INPUT
MODE
2
Press NUMBER key "0" and/or TV PROG so that "F-1"
appears on the display panel.
SELECT "EDIT" FOR PICTURE
CONTROL SET MODE
3
Follow the "Picture Control" section on page 15, then
select "EDIT."
NOTE:
When you select "EDIT" to dub tapes, be sure to select
"AUTO" (or "NORM" when the B.E.S.T. function is set to
"OFF") after you finish dubbing the tapes.
START CAMCORDER
4
Engage its Play mode.
START RECORDER
5
Engage its Record mode.
TV PROG
Recorder
Your recorder
IMPORTANT:
●
To edit, both the player and the recorder must be of the
same colour system. Press your recorder's COLOUR
SYSTEM button to select the appropriate colour system.
●
PAL, SECAM and NTSC camcorders can be used as a
player for editing.
●
For more information on multi-system compatibility,
Z
pg. 34.
To the remote PAUSE
connector
Editing Cable
(not provided)
AV Cable (not provided)
VIDEO OUT
AUDIO OUT
EDIT
Camcorder
Player
VIDEO IN
AUDIO IN
COLOUR SYSTEM
NUMBER "0"
