JVC HR-J667MS Instructions Manual Download

Page: 12 / 48

Playback

Features

Variable-Speed Search

ACTIVATE VARIABLE-SPEED

During playback, press PUSH JOG or

●

The more times you press, the faster the playback
picture moves.

●

To decrease speed, press the button for the opposite
direction.

To resume normal playback, press PLAY.

High-Speed Search

NOTE:

For short searches, press and hold FF or REW during playback
or still picture. When released, normal playback resumes.

ACTIVATE HIGH-SPEED

During playback or still, press FF for forward high-
speed search, or REW for reverse high-speed search.

To resume normal playback, press PLAY.

Still Picture/Frame-By-Frame

Playback

PAUSE DURING PLAYBACK

Press PAUSE. If there is vertical jitter, use the TV PROG
buttons to correct the picture.

ACTIVATE FRAME-BY-FRAME

PLAYBACK

Press PAUSE.

Press PUSH JOG or

To resume normal playback, press PLAY.

Slow Motion

ACTIVATE SLOW-MOTION

PLAYBACK

During still picture, press and hold PAUSE for 2
seconds, then release. Press and release again to return
to still picture.

During still picture, press and hold PUSH JOG or

Release to return to still picture.

To resume normal playback, press PLAY.

REW

PAUSE

TV PROG

PUSH JOG

PAUSE

PLAY

REW

ATTENTION

In the search, still, slow-motion or frame-by-frame
playback mode,

●

the picture will be distorted.

●

the noise bars will appear.

●

there may be a loss of colour.

PLAY

PLAYBACK (cont.)

Summary of Contents for HR-J667MS

















































Search results

Summary of Contents for HR-J667MS

Reviews:

Related manuals for HR-J667MS

Brands by name

Popular brands

JVC HR-J667MS, Instructions Manual

Search results

Summary of Contents for HR-J667MS

Reviews:

Related manuals for HR-J667MS

Brands by name

Popular brands