background image

EN 

11

Playback

Features

Take advantage of special functions possible with the recorder’s
controls or the remote control.

NOTE:

Refer to the SHUTTLE ring illustration below as you read the
following procedures.

R

e

v

e

rs

e

R

ev

er

se

Re

vers

e

Slow

Pla

y

F

o

rw

a

rd

s

e

a

rc

h

pl

ay

slow

motion

s

e

a

rc

h

Still 

Variable-Speed Search

ACTIVATE VARIABLE-SPEED

SEARCH

1

During playback or still, turn the SHUTTLE ring to the
right for forward variable-speed search, or to the left for
reverse variable-speed search (refer to the above
illustration.

OR

During playback, press PUSH JOG    or    .

The more times you press, the faster the playback
picture moves.

To decrease speed, press the button for the opposite
direction.

To resume normal playback, press PLAY.

%

%

High-Speed Search

NOTES:

For short searches, press and hold FF or REW for over 2
seconds. When released, normal playback resumes.

In the search, still, or frame by frame playback mode, the
picture may be distorted, and there may be a loss of colour.

ACTIVATE HIGH-SPEED

SEARCH

1

During playback or still, turn the SHUTTLE ring all the
way to the right for forward high-speed search, or to
the left for reverse high-speed search.

For forward search with a visible picture, turn the
SHUTTLE ring all the way to the right and release it
within 1 second.

For reverse search with a visible picture, turn the
SHUTTLE ring all the way to the left and release it
within 1 second.

OR

During playback or still, press FF for forward high-
speed search, or REW for reverse high-speed search.

To resume normal playback, press PLAY.

Still Picture/Frame-By-Frame

Playback

%

%

PAUSE DURING PLAYBACK

1

Press PAUSE. If there is vertical jitter, use the TV PROG
buttons to correct the picture.

ACTIVATE FRAME-BY-FRAME

PLAYBACK

2

Turn the JOG dial to the right for forward frame-by-
frame playback, or to the left for reverse frame-by-frame
playback.

OR

Press PAUSE.

OR

Press PUSH JOG    or    .

To resume normal playback, press PLAY.

Slow Motion

ACTIVATE SLOW-MOTION

PLAYBACK

1

During playback or still, turn the SHUTTLE ring to the
right for forward slow motion, or to the left for reverse
slow motion (refer to the illustration to the left).

OR

During still picture, press and hold PAUSE  for 2
seconds, then release. Press and release again to return
to still picture.

OR

During still picture, press and hold PUSH JOG    or    .
Release to return to still picture.

To resume normal playback, press PLAY.

%

%

Summary of Contents for HR-J647MS











































Reviews: