EN
17
1
2
3
4
5
6
7
8
9
0
2
4
1
3
Recording
Features
Record One Programme
While Watching Another
SELECT CHANNEL TO
WATCH
1
Once recording is in progress, all you need to do is to
set the channel controls on the TV for the station you
wish to view.
●
The programme selected with the TV's channel
controls appears on the TV screen while the one
selected with the TV PROG buttons is recorded on
the tape.
Instant Timer Recording (ITR)
This easy method lets you record for from 30 minutes to 6 hours
(selectable in 30-min. increments), and shuts the recorder off
after recording is finished.
START RECORDING
1
Press RECORD on the recorder.
ENGAGE ITR MODE
2
Press RECORD again. " " blinks and 0:30 appears on
the front display panel.
SET RECORDING DURATION
3
If you want to record for more than 30 minutes, press
RECORD to extend the time. Each press extends
recording time by 30 minutes.
NOTE:
You can only perform ITR using the RECORD button on the
recorder's front panel.
TV PROG
RECORD
C.RESET
TV PROG
Elapsed Recording Time
Indication
You can check the exact time of a recording.
SET COUNTER DISPLAY
1
Press DISPLAY until a counter reading appears on the
dispay panel.
●
By pressing the DISPLAY button, you can change the
display to show the counter reading, channel
position*, clock time.
*Channel position is not displayed during playback.
RESET COUNTER
2
Press C. RESET before starting recording or playback.
●
The counter is reset to "0:00:00" and shows the exact
elapsed time as the tape runs.
DISPLAY
Summary of Contents for HR-J461MS
Page 42: ...MEMO ...
Page 43: ...MEMO ...
