background image

14

1

4

¢

7

3

8

       

¡

1

2

3

4

5

6

7

/     

8

0

9

4  

2

1

3

Manual Tracking

Your video recorder is equipped with automatic tracking
control. During playback, you can override this and adjust the
tracking manually by pressing the TV PROG. buttons.

OVERRIDE AUTOMATIC

TRACKING

1

Press 

 on the remote to engage manual tracking.

ADJUST TRACKING

MANUALLY

2

Press TV PROG+ or  to adjust tracking.

RETURN TO AUTOMATIC

TRACKING

3

Press 

 on the remote to re-engage automatic

tracking.

NOTE:

When a new tape is inserted, the recorder enters the automatic
tracking mode automatically.

q

¢

¢

1

¡

PLAYBACK (cont.)

Instant ReView

Simply by pressing a single button, the recorder power comes
on, rewinds, and begins playback of the last timer-recorded
programme. If you have several programmes recorded, you can
easily access any of them.

NOTE:

Before starting, make sure that the recorder is off and that the
Timer mode is disengaged.

ACTIVATE INSTANT

REVIEW

1

Press REVIEW. The recorder power comes on and the
recorder searches for the index code indicating the start
of the last timer-recorded programme. Once it’s found,
playback begins automatically.
The front display panel tells you how many programmes
have been recorded. If you have, for example, 3
programmes, “REVIEW” and "3" appear and blink. To
watch the first of the 3 programmes, press REVIEW three
times. The recorder searches and begins playback
automatically. You can access a programme as far as 9
index codes away from the current tape position.

NOTE:

Instant ReView is not possible while the recorder is in the Timer
mode.

TV PROG.

REVIEW

TV PROG.

Summary of Contents for HR-J245EA

























































Reviews: