JVC HR-E249E, Instructions Manual

Page: 28 / 52

28
EN
1 2
4 5
3
6
8
0
7 9
2
4
1
3
OK
CANCEL
START+/–
TV PROG.
DATE+/–
STOP+/–
Auto Timer
When the Auto Timer is set to ON the timer is automatically
engaged when the recorder power is turned off and automati-
cally disengaged when the recorder is powered back on.
ACCESS MAIN MENU
SCREEN
1
Press MENU twice.
ACCESS MODE SET
SCREEN
2
Press PUSH JOG
%fi
to
move the highlight bar
(pointer) to "MODE SET",
then press OK.
SELECT MODE
3
Press PUSH JOG to select
either "ON" or "OFF".
RETURN TO NORMAL
SCREEN
4
Press MENU.
NOTE:
For safety, when Auto timer is set to "OFF", all other recorder
functions are disabled while the Timer mode is engaged. To
disengage the timer, press TIMER.
%
MENU
5
MODE SET
AUTO TIMER : OFF
O. S. D. : ON
B. E. S. T. : ON
AV2 SELECT : AV2
[
5∞
]
=
[ ] : ON/OFF
[MENU] : EXIT
MAIN MENU
MODE SET
AUTO CH SET
MANUAL CH SET
GUIDE PROG SET
CLOCK SET
[
5∞
]
=
[MENU] : EXIT
TIMER RECORDING (cont.)
TIMER
PROG. CHECK
PUSH JOG
Check And Cancel
Programmes
ACCESS PROGRAMME
DISPLAY AND/OR SCREEN
1
Press PROG. CHECK.
●
The display panel shows the programme start time.
Pressing OK changes the display to the programme
stop time, then the date and channel position.
●
If the recorder is turned on and the TV is set to its
VIDEO channel or AV mode, you can check program
information on screen as well.
●
Each time you press PROG. CHECK, the next
programme's information appears.
If All Information Is Correct . . .
. . . programming is completed.
If You Wish To Revise Data . . .
. . . with the recorder's power turned on, go to step 2.
If You Wish To Cancel A Program . . .
. . . with the recorder's power turned on, press CANCEL.
All information you input is deleted.
REVISE PROGRAMME
INFORMATION
2
Input the appropriate data using the START +/–, STOP
+/–, DATE +/– and TV PROG. +/– buttons on the
remote control.