JVC HD1US - Camcorder - 1.18 MP, Instructions Manual

Page: 52 / 92

52
EN
Master Page: Left
The Navigation Function helps you check tape
contents by making thumbnail images on a memory
card.
To make thumbnail images during video
recording automatically
1
Load a cassette. (
墌
pg. 18)
2
Load a memory card. (
墌
pg. 19)
3
Set the Power Switch to “
A
” or “
M
” while
pressing down the Lock Button located on the
switch.
4
Set “NAVIGATION” to the desired navigation
storing time. (
墌
pg. 35, 36)
●
If the “ ” indicator appears blinking on the
screen, wait until it stops blinking. If it does not
stop blinking after a while, check if a memory
card is loaded.
5
Press the Recording Start/Stop Button to start
recording.
●
When the recording time
is over the navigation
time set in step
5 , “ ”
appears briefly, then the
image of the point where
recording is started is
captured and stored in
the memory card as a
thumbnail image.
●
If the Recording Start/
Stop button is pressed
before “
” stops
blinking, the image of the point where the
loaded memory card is recognized is captured.
6
Press the Recording Start/Stop Button to stop
recording.
To make thumbnail images after video recording
manually...
1)
Perform steps 1 to 3 above.
2) Set “NAVIGATION” to “MANUAL”.
(
墌
pg. 35, 36)
3) After the recording, press NAVI STORE .
•The “ ” indicator appears briefly and the
captured image is stored in the memory card as
a thumbnail image.
NOTES:
●
The remaining number of storable thumbnail
images also appears on the screen when it reaches
10 or less. If “REC SELECT” is set to “
/ ”
in DSC Menu, the number shows how many
640 x 480 pixel images can be stored.
●
If “5S” is set to “5S” or “Anim.” in MANUAL
Menu, the NAVIGATION function will not work
properly.
To find scenes on tape using thumbnail images
(NAVIGATION Search)
1
Load a cassette. (
墌
pg. 18)
2
Load a memory card. (
墌
pg. 19)
3
Set the Playback Mode switch to “VIDEO”.
4
Set the Power Switch to “ P ” while pressing
down the Lock Button located on the switch.
5
Press NAVI during video playback or stop mode.
●
The loaded cassette’s
NAVIGATION thumbnail
image screen appears.
●
Press
3
to display the
previous page. Press
5
to display the next page.
6
Rotate the MENU Wheel to select the desired
image, and press it.
●
The “NAVIGATION SEARCH” indication
appears blinking and the camcorder starts
searching the tape for the relevant point of the
selected thumbnail image.
To cancel NAVIGATION search midway...
Press
8
or
4
·
9
.
NAVIGATION Function
Power Switch
Lock Button
Fast-Forward Button (
5
)
Rewind Button (
3
)
Playback Mode Switch
MENU Wheel
NAVI Button
NAVI STORE Button
PAUSE PAUSE PAUSE
1h m 1h m 1 0 0
Displayed while the
captured image is
being stored in the
memory card.
TC : 1 3 : 2 3 : 1 5
3 2 2 4 Y DATE : A M : ’ 3 0 : 3 2 9 AM
ON I T NAV I GA
1 2 3
4 5 006
FEATURES FOR RECORDING (cont.)
GR-HD1US.book Page 52 Monday, April 14, 2003 5:21 PM