ENGLISH
20
Severe noise or
snow
Troubleshooting
Patterns, stripes
or noise
I can’t turn it on!
Is the power cord connected to the AC outlet
correctly?
The remote
control doesn’t
work!
Is the TV connected correctly to
the aerial?
Change the direction of the aerial.
Is the aerial or its cable
damaged?
Consult your retailer
Ghosting
(Doubling of images)
Are you receiving interference
from signals reflected off
mountains or buildings?
Adjust the direction of your
aerial, or change to a
good-quality directional aerial
Is the aerial receiving interference
from high-voltage power lines or
wireless transmitters?
Consult your retailer
Are connected devices too close
to the TV?
Insert the minimum distance
between the aerial and the
cause of interference until no
interference
Are the batteries flat?
Are you more than 7 meters away
from the TV?
Is the “MODE (TV, VCR/DVR, DVD, HC)” set to “TV”?
When viewing teletext, the TV menu bar does not appear.
Depending on the stability of the signal, there may be a time
lag when changing channels.
Problem
Actions
page
Unplug the TV, and wait about 1 hour until the lamp
completely cooled. Then plug the TV in again. (Turning on the
TV soon may shorten the lamp life.)
Remote control
stops working
–
Press “
” to return to your settings.
Aspect ratio changes
unintentionally
13
Unnatural colour >>> Adjust “Colour” and “Bright”.
Check your “Colour System”.
Noise >>> Set to the following functions.
Picture Mode : Standard
Super DigiPure : Max
Dull picture >>> Set to the following functions.
Picture Mode : Bright
Super DigiPure : Min
Poor picture quality
18
19
18
19
18
19
If you connected S-Video output device, check the “S-IN”
setting.
If the top of the image is distorted, check the video signal
quality itself.
If movement appears unnatural when receiving a signal from
a DVD player, etc. with 625p (progressive scanning), change
the output setting of the external device to 625i (interlaced
scanning).
Strange picture
when using an external
device
15
–
–
Basics
Screen
Picture
Adjust the “PC Position”.
PC screen alignment
is off
15
Although the HD-ILA element is manufactured with high-
precision technology, understand that some pixels may be
lost or permanently displayed.
Black or white dots
appear on the screen
–
Blue screen appears
on the screen
Switch “Blue Back” to “Off.”.
18
Switch “Child Lock” to “Off.”
Front control buttons
do not work
18
Adjust the “Iris” brighter.
The screen is dim
18
LCT2237-001A-A.indb 20
LCT2237-001A-A.indb 20
4/5/2007 11:22:13 AM
4/5/2007 11:22:13 AM
