background image

5

Warnings

  Caring for the Cabinet

  Caring for the Screen

Normally, light dusting with a soft, non-scratching duster will keep your TV clean.

If you wish to wipe down the television, first unplug it. Then wipe gently with a soft cloth, slightly 
moistened with water. You can add a few drops of mild liquid detergent to the water to help 
remove spots of oily dirt.

•   DO NOT allow liquid to enter the TV through the ventilation slots.
•   DO NOT use strong or abrasive cleaners on the TV.
•   DO NOT spray liquids or cleaners directly on the TV’s surface.
•   DO NOT rub or scrub the TV harshly. Wipe the set gently with a soft cloth.

The screen is treated with an electrostatic-proof coating. When it gets dirty, wipe it gently with a 
soft cloth. If the screen is very dirty, wipe it down with a cloth dipped in a diluted kitchen cleaner 
and thoroughly wrung-out. Then wipe immediately after with a clean, dry cloth.

Do not apply alcohol, organic solvents (like acetone), acidic or alkaline cleansers to the screen. 
These will remove the coating layer and cause discolorations.

Do not push or hit the screen. This could cause scratches on the screen surface and image 
distortions.

We have an important note for customers who subscribe to basic cable services (do not have 
a separate cable box) and plan to use their JVC TV remote control to select channels. 

Once you run the Auto Tuner Setup (which detects and programs all the channels your TV is 
receiving through the RF input), every channel number available from your cable company 
will appear in your television’s Channel Summary and they will all be marked as available for 
scanning. Even though every channel is detected and appears as available, you will only be 
able to view those that you speci

fi

 cally subscribe to from your cable company. This will likely 

mean there are blank channels between those channels you wish to scan or “surf”. 

We apologize for any inconvenience this may cause but it is important to note that this is 
not a malfunction of your television. If you want to sequentially scan those channels you 
subscribe to without blank ones in between, you can contact your cable company for their 
cable box and remote.

LCT2170 Eng.indd   5

LCT2170 Eng.indd   5

8/4/06   10:26:51 AM

8/4/06   10:26:51 AM

Summary of Contents for HD-56FB97 - 56" Rear Projection TV

























































































Reviews: