JVC GZMG21US - Everio Camcorder - 680 KP Instructions Manual Download

Page: 60 / 72

Warning Indications

The following indications appear on the screen.

Indication

Meaning

墌

(Battery indicator)

●

Displays the remaining battery power.
Remaining power level

●

As the battery power comes close to nil, the battery indicator
blinks. When the battery power is exhausted, power turns off
automatically.

–

SET DATE/TIME!

●

Appears when the date/time is not set.

●

Appears when the built-in clock (lithium) battery is discharged and
the previously set date/time is erased.

13
57

LENS CAP

●

Appears for 5 seconds after power is turned on with the power
switch set to

if the lens cap is attached or when it is dark.

–

PLEASE INSERT
MEMORY CARD!

●

Appears when there is no SD card inserted in the SD slot.

HARD DISK DRIVE IS
NOT FORMATTED

●

Appears when the built-in hard disk needs to be formatted.

THIS CARD IS NOT
FORMATTED

●

Appears when an unformatted SD card is inserted.

HDD ERROR!
MEMORY CARD
ERROR!

●

Appears when some errors occurred with the recording media.

●

Remove the card once and insert it again. If the error is not
cancelled, replace the card with one that has been guaranteed for
correct operation.

●

Perform clean up to restore the capacity of the recording media.

●

It is recommended to run check disk regularly on the PC,
providing that there is no data on the hard disk of the camera.

–

CHECK CARD’S WRITE
PROTECTION SWITCH

●

Appears when you attempt recording when the write/erase
protection tab on the SD card is set to the “LOCK” position.

NO VIDEO FILES STORED!

●

Appears if there are no video files when you attempt video
playback.

–

NO IMAGE FILES
STORED!

●

Appears if there are no still image files when you attempt still
image playback.

–

NO MEMORY CARD

●

Appears when the SD card is not inserted to the SD slot for file
copy/move operation.

–

NO SUPPORTED FILES

●

Appears when there are no JPEG (still image) files to be copied or
moved in recording media.

–

Exhausted

High

M6E3US.book Page 60 Tuesday, February 21, 2006 12:36 PM

Summary of Contents for GZMG21US - Everio Camcorder - 680 KP









































































Search results

Summary of Contents for GZMG21US - Everio Camcorder - 680 KP

Reviews:

Related manuals for GZMG21US - Everio Camcorder - 680 KP

Brands by name

Popular brands

JVC GZMG21US - Everio Camcorder - 680 KP, Instructions Manual

Search results

Summary of Contents for GZMG21US - Everio Camcorder - 680 KP

Reviews:

Related manuals for GZMG21US - Everio Camcorder - 680 KP

Brands by name

Popular brands