JVC GV-CB1, Instructions Manual

Page: 54 / 68

54
EN
BASIC OPERATIONS
(cont.)
Opening a file saved on floppy disk
1
INSERT FLOPPY DISK INTO
DRIVE
2
SELECT DRIVE NUMBER
Click
Ä
in "DRIVE".
3
LOOK FOR FILE NAMES
Open "tape" in the directry.
4
SELECT FILE NAME
Follow steps 2 and 3 in "Opening a
saved file" on the left.
MOVIE PLAYER
FILE
POWER
PROGRAM PLAYBACK
COUNTER
Drop
MEMO
ID
SCENE CUT IN CUT OUT
START SCENE
ELAPSED TIME
00:00:00:00F
IN/OUT
OFF ON
MODE
STILL
PLAY
SEARCH
SLOW
FF
REW
00:00:00:00F 06
File Video Printer Help Edit
New
Open
Save
Save As...
ID Change
Device Change
Name Change
Pause Time...
Open VCR Control Window
Close Serial
Initialize
Counter Reset
Exit
Ctrl+N
Ctrl+O
Ctrl+S
Ctrl+A
File
Opening a saved file
1
LOOK FOR FILE NAMES
Click "Open" from "File" on the MOVIE
PLAYER window.
•The "Open a program list" dialog box
appears.
2
SELECT FILE NAME
Saved file names appear in the "FILE
NAME" field. Click on the file name you
want and it appears in the field above.
3
DETERMINE FILE NAME
Click "OK" and the file will be read.
•The MOVIE PLAYER window returns.
Open a program list
FILE NAME
MEMO
DIRECTORY
travel. jlp
CANCEL
OK
DRIVE
c:
travel. jlp
c: \
jlip
tape
Europe Tour
Correcting the program counter data
1
DESIGNATE SCENE
Double-click on the scene you want to
modify.
OR...
Click on the scene you want to modify
and choose "Modify" from "Edit".
•The "Modify Edit Points" dialog box
appears (
Z
pg. 55).
2
ENTER NEW DATA
Click on the part to be corrected and
input a new value there. To correct the
data, click on "OK".
Cutting the counter data being set up
1
DESIGNATE SCENE
Click on the scene you want to cut.
2
CUT SCENE
Choose "Cut" from "Edit".
•The message "Scene No. will be
deleted." appears.
To cut the scene, click on "OK".
Cutting all programmed scenes
1
CUT SCENE
Choose "All Clear" from "Edit". The
message "OK to delete all programmed
scenes ?" appears. To cut, click on "OK".
Correcting and cutting the programmed counter data