EN
81
SYMPTOM
POSSIBLE CAUSES
CORRECTIVE ACTION
17.
Program AE with special
effects and Fade/Wipe Effects
do not work.
18.
The Black & White Fader
does not work.
19.
The Dissolve function does
not work.
20.
The Picture Wipe and Dissolve
functions do not work.
21.
The picture wipe function
does not work.
22.
Scene transition does not go
as expected.
23.
The Video Echo mode does
not work.
17.
• The Operation Switch is set to
“
”.
18.
• The Sepia or Monotone mode
is activated.
19.
• The Sepia, Monotone or Slow
Shutter mode of Program AE
with special effects is activated.
• “WIDE MODE” is set to
“SQUEEZE” or “PS-WIDE” in
the Menu Screen.
• The previously selected mode
of Program AE with special
effects was changed after the
last selected scene for editing
was registered.
20.
• The last selected editing scene
is ending.
• At the end of the last selected
scene for editing, the
POWER
Switch was set to “OFF”.
• The power is off.
21.
• The Slow Shutter mode is
activated.
• “WIDE MODE” is not set to
“OFF”.
22.
• When using “Picture Wipe/
Dissolve” (
墌
pg. 36), there is a
delay of a fraction of a second
between the previous record
stop-point and the Dissolve
start-point. This is normal, but
this slight delay becomes
especially noticeable when
shooting fast-moving subject
or during rapid panning.
23.
• The Picture Wipe or
Dissolve functions are in use.
• “WIDE MODE” is set to
“SQUEEZE” or “PS-WIDE” in
the Menu Screen.
• A Fade-In or Fade-Out is in
progress.
17.
• Set the Operation Switch to
“
” (
墌
pg. 36, 38).
18.
• Turn off Sepia and Monotone
(
墌
pg. 36, 38).
19.
• Turn off Sepia, Monotone or
Slow Shutter before adding
Dissolve to a scene transition
(
墌
pg. 36, 38).
• Set “WIDE MODE” to
“CINEMA” or “OFF” mode
(
墌
pg. 30).
• Make sure you have selected
the mode of Program AE with
special effects you want before
starting editing (
墌
pg. 36, 38).
20.
• Select Picture Wipe or Dissolve
before beginning recording. The
effects are then automatically
activated (
墌
pg. 36).
• Do not turn off the camcorder’s
power after setting Edit-In and
Edit-Out points, as they will all
be erased (
墌
pg. 36).
• The camcorder automatically
shuts off after 5 minutes have
elapsed in the Record-Standby
mode. Make sure you
continue operations within 5
minutes after engaging Record-
Standby mode (
墌
pg. 36).
21.
• Disengage the Slow Shutter
mode or set “WIDE MODE”
to “OFF” before preparing to
use the Picture Wipe
(
墌
pg. 30, 36, 38).
22.
————
23.
• Set “WIDE MODE” to
“CINEMA” or “OFF” mode
(
墌
pg. 30).
• Do not try to use the Video
Echo mode during a Fade-In
or Fade-Out (
墌
pg. 36, 38).
CONTINUED ON NEXT PAGE
