EN
7
GETTING ST
ARTED
1
2
3
To battery
pack mount
To DC OUT
connector
To AC outlet
AC Power
Adapter/Charger
AA-V67EG or
AA-V67EK
DC cord
ATTENTION:
Before detaching the power source,
make sure that the camcorder’s power
is turned off. Failure to do so can result
in a camcorder malfunction.
Power cord
Approximate recording time
BATT. RELEASE
Button
NOTES:
●
Recording time is reduced significantly under the
following conditions:
•
Zoom or Record-Standby mode is engaged repeatedly.
•
The LCD monitor is used repeatedly.
●
Before extended use, it is recommended that you
prepare enough battery packs to cover 3 times the
planned shooting time.
USING AC POWER
Use the AC Power Adapter/Charger (connect as shown in the illustration).
NOTES:
●
The provided AC Power Adapter/Charger features automatic voltage selection in the AC range from 110 V to
240 V.
●
For other notes,
Z
pg. 6.
INFORMATION:
VU-V856KIT is a set composed of the
BN-V856U battery pack and AA-V80EG or
AA-V80EK AC Power Adapter/Charger.
Read the VU-V856KIT’s instruction manuals
before using.
It is impossible to charge the BN-V856U battery
pack using the provided AC Power Adapter/
Charger. Use the optional AA-V80EG or
AA-V80EK AC Power Adapter/Charger.
Battery pack
BN-V607U
BN-V615U
BN-V628U
BN-V856U
LCD monitor on/
Viewfinder off
1 hr. 5 min.
2 hrs. 10 min.
3 hrs. 50 min.
7 hrs. 30 min.
LCD monitor off/
Viewfinder on
1 hr. 20 min.
2 hrs. 40 min.
4 hrs. 30 min.
9 hrs.
USING THE BATTERY PACK
1
Tilt the viewfinder upward
1
.
2
With the arrow on the battery pack pointing
downward, push the battery pack slightly against the
battery pack mount
2
, then slide down the battery
pack to attach it
3
.
•If the battery pack is attached with its
mark set
in the wrong direction, a malfunction may occur.
To Detach The Battery Pack . . .
.... tilt the viewfinder upward
1
and slide the battery
pack up slightly while pressing BATT. RELEASE to
detach it.
