EN
35
PLA
YBACK
VCR
To TV or VCR
* When connecting the cables, open this cover.
White to AUDIO L IN
Red to AUDIO R IN
S-Video cable
(provided)
Yellow to VIDEO IN
To S-VIDEO IN
C. Connection to a TV or VCR equipped with an S-VIDEO IN and/or A/V input (RCA type) connectors
Connector
cover*
When connecting the S-Video
cable, open the LCD monitor.
←
When the S-Video
cable is not used.
To S-VIDEO
To AV
Core filter
Core filter
1
Make sure all units are turned off.
2
Connect the camcorder to a TV or VCR as
shown in the illustration (
Z
pg. 34, 35).
If using a VCR . . . go to step 3.
If not . . . go to step 4.
3
Connect the VCR output to the TV input,
referring to your VCR’s instruction manual.
4
Turn on the camcorder, the VCR and the TV.
5
Set the VCR to its AUX input mode, and set the
TV to its VIDEO mode.
TV
Audio/Video cable
[mini-plug to RCA plug]
(provided)
NOTES:
●
It is recommended to use the AC Power Adapter/ Charger as the power supply instead of the battery pack
(
Z
pg. 7).
●
When using the cables, make sure you connect the end of the cable with the core filter to the camcorder.
The core filter reduces interference.
●
To monitor the picture and sound from the camcorder without inserting a tape, set the camcorder’s Power
Switch to “5S”, “
” or “
”, then set your TV to the appropriate input mode.
●
Make sure you adjust the TV sound volume to its minimum level to avoid a sudden burst of sound when the
camcorder is turned on.
●
If you have a TV or speakers that are not specially shielded, do not place the speakers adjacent to the TV as
interference will occur in the camcorder playback picture.
●
Set the video out select switch of the cable adapter as required:
Y/C
: When connecting to a TV or VCR which accepts Y/C signals and uses an S-Video cable.
CVBS : When connecting to a TV or VCR which does not accept Y/C signals and uses an audio/video cable.
To choose whether or not the following displays
appear on the connected TV . . .
•Date/Time
.... set “DISPLAY” to “ON” or “OFF” in the Menu
Screen (
Z
pg. 32).
•Time Code
.... set “TIME CODE” to “ON” or “OFF” in the
Menu Screen (
Z
pg. 32).
•Playback Sound Mode and Tape Speed Displays
.... set “INDICATION” to “ON” or “OFF” in the
Menu Screen (
Z
pg. 32).
•Playback Sound Mode, Tape Speed and Tape
Running Displays
.... set the Power Switch to “
” or “5S”. Press
MENU/BRIGHT and set “ON SCREEN” to “ON”
or “OFF” in the Menu Screen (
Z
pg. 20). Then,
set the Power Switch back to “
”. Or, press
DISPLAY on the RM-V716U remote control.
