70
EN
3
2
1
Cleaning The Camcorder
1
To clean the exterior, wipe gently with a soft cloth.
Put the cloth in diluted mild soap and wring it well to
wipe off heavy dirt. Then wipe again with a dry cloth.
2
Press
PUSH OPEN
and open the LCD monitor.
Wipe gently with a soft cloth. Be careful not to
damage the monitor. Close the LCD monitor.
3
To clean the lens, blow it with a blower brush,
then wipe gently with lens cleaning paper.
4
To clean the viewfinder, raise it to the vertical
position. Open the viewfinder cleaning hatch in the
direction of the arrow
1
.
5
Insert a lens blower or soft cloth into the gap at
the bottom of the viewfinder and clean the interior of
the viewfinder with it
2
.
6
Close the hatch. Tilt the viewfinder back to the
horizontal position.
NOTES:
●
Avoid using strong cleaning agents such as benzine or
alcohol.
●
Cleaning should be done only after the battery pack
has been removed or other power units have been
disconnected.
●
Mold may form if the lens is left dirty.
●
When using a cleaner or chemically treated cloth refer
to the cautions of each product.
After Use
1
Turn off the camcorder.
2
Slide and hold
OPEN/EJECT
in the direction of
the arrow, then pull the cassette holder cover open
until it locks. The cassette holder opens automatically.
Remove the cassette.
3
Press “PUSH HERE” to close the cassette holder.
• Once the cassette holder is closed, it recedes
automatically. Wait until it recedes completely before
closing the cassette holder cover.
4
Tilt the viewfinder upward
1
. Press
BATT.
RELEASE
2
and remove the battery pack
3
.
USER MAINTENANCE
2
1
Cassette
holder cover
OPEN/EJECT
Switch
PUSH HERE
Hatch
BATT. RELEASE Button
Remove.
Lens blower
Cassette holder
1 GR-DVL822U_EN 58-75
02.5.11, 09:53 AM
70
