JVC GR-DVL822 Page 6 Instructions Manual Download

Page: 6 / 84

Automatic Demonstration takes place when “DEMO
MODE” is set to “ON” (factory-preset).

䡲

Automatic Demonstration starts when there is no operation for
about 3 minutes after the Power Switch is set to “

AUTO

” or

“

MANUAL

” and no cassette is in the camcorder.

䡲

Performing any operation during the demonstration stops the
demonstration temporarily. If no operation is performed for more
than 3 minutes after that, the demonstration will resume.

䡲

“DEMO MODE” remains “ON” even if the camcorder power is
turned off.

䡲

To cancel Automatic Demonstration:

Set the Power Switch to “

MANUAL

” while pressing down the

Lock Button located on the switch and press the

MENU/

BRIGHT

wheel in. The Menu Screen appears.

Rotate the

MENU/BRIGHT

wheel to select “

SYSTEM”

and press it. The SYSTEM Menu appears.

Rotate the

MENU/BRIGHT

wheel to select “DEMO MODE”

and press it. The Sub Menu appears.

Rotate the

MENU/BRIGHT

wheel to select “OFF” and press

it.

Rotate the

MENU/BRIGHT

wheel to select “

RETURN”,

and press it twice. The normal screen appears.

NOTE:

If you do not detach the Lens Cap, you cannot see the actual changes of the Automatic Demonstration activated on
the LCD monitor or viewfinder.

How To Attach The Lens Cap

To protect the lens, attach the provided lens cap to the camcorder as shown in the illustration.

NOTE:

To confirm the lens cap is on correctly make sure the cap is flush to the camera.

AUTOMATIC DEMONSTRATION

MODE

DEMO

–

OF F

MENU/BRIGHT Wheel

Sub Menu

Lock Button

Power Switch

The lens cap can
be attached only
when the lens
hood is attached
to the camcorder.

1 GR-DVL822U_EN 02-19

02.5.11, 09:47 AM

Summary of Contents for GR-DVL822





















































































Search results

Summary of Contents for GR-DVL822

Reviews:

Related manuals for GR-DVL822

Brands by name

Popular brands

JVC GR-DVL822, Instructions Manual

Search results

Summary of Contents for GR-DVL822

Reviews:

Related manuals for GR-DVL822

Brands by name

Popular brands