EN
11
Charging Environment
Perform charging where the temperature is between 10° and 30°C (50°F and 86°F). 20° to 25°C (68°F to 77°F)
is the ideal temperature range for charging. If the environment is too cold, charging may be incomplete.
Continuous Shooting
Continuous shooting is possible (See table below for recording time) under the following conditions:
• The temperature is approximately 20°C/68°F
However, . . .
• If the temperature is below 10°C/50°F, or
• If zoom or Record-Standby is engaged repeatedly, continuous shooting capability is reduced significantly.
Before extended use, it is recommended that you prepare enough battery packs to cover 3 times the
planned shooting time.
Installing The Battery Pack
The battery pack does not charge while in the camcorder. Before installation, make sure the battery pack has
been charged fully.
1
OPEN BATTERY COVER
Slide down the open switch.
2
INSERT CHARGED BATTERY
Insert the
mark end of the battery first.
Inserting the battery backwards will result in
malfunction.
3
CLOSE BATTERY COVER
NOTES:
●
To remove the battery pack, turn off the
camcorder and open the battery cover so that the
battery pack comes out halfway. Then pull out the
battery pack.
●
Be careful not to drop the battery pack.
Battery
Battery cover
Open switch
(BATTERY)
* The Battery Holder is included in the optional VU-V615KITU Battery Holder Kit.
** The BN-V856U battery, as well as the AA-V80U AC Power Adapter/Charger for charging it, is included in
the optional VU-V856KITU Extended-Use Battery Pack Kit.
No. of batteries to supply power
Using one battery (BN-V607U) installed in the camcorder
Using one battery (BN-V615U) installed in the optional Battery Holder*
attached to the camcorder
BN-V607U x 2
BN-V607U &
BN-V615U
Using a BN-V856U battery**
Using two batteries; one (BN-V607U) installed in the
camcorder and one (BN-V607U or BN-V615U)
installed in the optional Battery Holder* attached to
the camcorder
Approximate recording
time (unit: min)
60
120
120
180
420
