EN
37
MasterPage: Start_Right
Features For Recording
EN
G
L
ISH
LED Light can be used to brighten the subject
in the dark place during video recording or
D.S.C. shooting.
Press
LIGHT
repeatedly to change the
setting.
Notes:
●
Be careful not to point the LED Light directly to
eyes.
●
If the light does not reach the subject when the
LED Light setting is “ON”, the Night-Scope
function will be activated, and makes it possible
to shoot the subject brighter.
●
Since subjects are shot at a reduced shutter
speed when the LED Light setting is “ON”, they
will appear slightly blurred.
This feature is useful for recording or playing
back precious or hard-to-see moments at a
slow speed. Sound is recorded and played
back in real time.
Set the
MEMORY/VIDEO
Switch to
“VIDEO”
15).
Set the Power Switch to
“REC”
or
“PLAY”
●
If set to “
REC
”, the recording mode should
be set to “
M
Set “SNAP/SLOW” to “SLOW”.
(
33, 37) The Live Slow indicator “
”
appears.
Press
SLOW
during recording or
playback.
●
The moving pictures are divided into four
frames. They are recorded or played back
for 1.5 seconds, and then normal recording
or playback resumes.
Note:
Live Slow cannot be used when the 16:9 Wide
mode is selected.
This feature lets you record still images that
look like photographs onto a tape.
Set the
MEMORY/VIDEO
Switch
to
“VIDEO”
Set the Power Switch to
“REC”
15).
Set “REC MEDIA” to “
/
” or “
”. (
Set “SNAP/SLOW” to “SNAP”
Press
SNAPSHOT
.
Notes:
●
The “
O
” indication appears and a still image
will be recorded for approx. 5 seconds, then the
camcorder re-enters the Record-Standby mode.
●
You can perform Snapshot also during
recording. A still image will be recorded for
approx. 5 seconds, then the normal recording
resumes.
●
If the image taken by snapshot is too dark or too
bright, select
39) or “SPOTLIGHT”
41).
●
The image size for snapshot in 16:9 mode is
640 x 360. However, the approx. number of
storable images is similar with snapshot in 4:3
mode
26).
Keeping
SNAPSHOT
pressed in step
provides an effect similar to serial photography.
(Interval between still images: approx. 1
second).
●
The Motor Drive mode is disabled when
“REC MEDIA” is set to
/
or
33).
LED Light
Live Slow
GR-D860
LIGHT
LED Light
No
display
The light is on always.
The light turns on automatically
when dark.
Turns off the light.
GR-D860
1
1
1
1
2
2
2
2
3
3
3
3
Snapshot
(Record Still Image On Tape)
Motor Drive Mode
4
4
4
4
1
1
1
1
GR-D860
2
2
2
2
3
3
3
3
GR-D860
4
4
4
4
GR-D860
5
5
5
5
5
5
5
5
GR-D860
Features For Recording
GR-D820EK_GR-D860EK.book Page 37 Monday, November 19, 2007 10:15 AM