JVC GR-D820EK Instructions Manual Download Page 33

Page: 33 / 56

MasterPage: Start_Right

Menus For Detailed Adjustment

EN
G

ISH

(RECORDING) is available for Video Recording Menu only.

* Available only when the

MEMORY/VIDEO

Switch is set to “

VIDEO

”.

** Available only when the

MEMORY/VIDEO

Switch is set to “

MEMORY

”.

Menus

Settings: [ ] = Factory-Preset

WIND CUT

[OFF]

: Disengages the function.

Helps cut down on noise created by wind. The “

” indicator

appears. The quality of the sound will change. This is normal.

IMAGE
QUALITY

[FINE]

(

)

/STANDARD

(

)

The Image Quality mode can be selected to best match your needs.
For the approx. number of storable images (

墌

26).

REC

ORDING

REC MODE

[SP]

: To record in the SP (Standard Play) mode. (SP indicator does not

appear on the screen).

Long Play - more economical, providing 1.5 times the recording
time.

Note:

During playback of a tape recorded on another camcorder, blocks of noise may
appear or there may be momentary pauses in the sound.

SOUND
MODE

[12BIT]

: Enables video recording of stereo sound on four separate

channels. (Equivalent to the 32 kHz mode of previous models).

16BIT

Enables video recording of stereo sound on two separate

channels. (Equivalent to the 48 kHz mode of previous models).

SNAP/SLOW

[SNAP ]

: Snapshot mode.

SLOW

: Live Slow mode.

For details on the procedure, refer to “Live Slow” (

墌

37) and “Snapshot

(Record Still Image On Tape)” (

墌

37).

REC MEDIA

(Tape):

When Snapshot recording is performed, still
images are recorded only onto the tape.

(Tape/Card): Still images are recorded only onto the tape but

also in the memory card (640 x 480 pixels).

[

(Card)

]

Still images are recorded into the Memory Card
only. Select this setting to perform Dual Rec.
(

墌

23)

GR-D860

640

GR-D860

Menus For Detailed Adjustment

GR-D820EK_GR-D860EK.book Page 33 Monday, November 19, 2007 10:15 AM

Summary of Contents for GR-D820EK

























































Search results

Summary of Contents for GR-D820EK

Reviews:

Brands by name

Popular brands

JVC GR-D820EK, Instructions Manual

Search results

Summary of Contents for GR-D820EK

Reviews:

Brands by name

Popular brands