JVC GR-D790U Instructions Manual Download

Page: 21 / 64

MasterPage: Video_Heading0_Right

RECORDING & PLA

YBACK

VIDEO PLAYBACK

Load a cassette. (

pg. 16)

Set the

VIDEO/MEMORY

Switch to

“VIDEO”.

Set the Power Switch to “PLAY” while

pressing down the Lock Button located on the
switch.

●

The above screen (referring to the control lever
(

pg. 7)) will be displayed for approx. 3

seconds on the LCD Monitor.

To start playback, press

To stop playback, press

●

During Stop mode, press

to rewind, or

to fast-forward the tape.

●

Press

SET

to display the guide operation

screen.

To control the speaker volume

Slide the Power Zoom Lever (

VOL. +/–

)

towards

“+”

to turn up the volume, or towards

“–”

to turn down the volume.

NOTES:

●

The playback picture can be viewed in the LCD
monitor, viewfinder or on a connected TV.
(

pg. 23)

●

If Stop mode continues for 5 minutes when
power is supplied from a battery, the camcorder
shuts off automatically. To turn the camcorder on
again, push back and pull out the viewfinder
again or close and re-open the LCD monitor.

●

When a cable is connected to the AV connector,
the sound is not heard from the speaker.

Appears when pictures recorded in the HDV
format are detected. The pictures in the HDV
format cannot be played back with this
camcorder.

Still Playback

Pauses during video playback.

Press

during playback.

To resume normal playback, press

again.

●

If still playback continues for more than about
3 minutes, the camcorder’s Stop mode is
automatically engaged.

Normal Playback

Operation

To select

Move the control lever up.

Move the control lever down.

Move the control lever right.

Move the control lever left.

Speaker

Lock Button

MENU

VOL. +/–

VIDEO/
MEMORY

Power
Switch

BLANK

SET

HDV

GR-D790US.book Page 21 Tuesday, November 7, 2006 1:39 PM

Summary of Contents for GR-D790U

































































Search results

Summary of Contents for GR-D790U

Reviews:

Related manuals for GR-D790U

Brands by name

Popular brands

JVC GR-D790U, Instructions Manual

Search results

Summary of Contents for GR-D790U

Reviews:

Related manuals for GR-D790U

Brands by name

Popular brands