background image

FEATURES FOR RECORDING

40 

EN

MasterPage: Left

These effects let you make pro-style scene 
transitions. Use them to spice up the transition 
from one scene to the next.

Wipe or Fader works when video recording is 
started or stopped.

1

Set the 

VIDEO/MEMORY

 Switch to 

“VIDEO”.

2

Set the Power Switch to “REC”.

3

Set the recording mode to “

M

”. 

(

 pg. 20)

4

Set “WIPE/FADER” in “FUNCTION” Menu. 

(

 pg. 32)

5

Press the Recording Start/Stop Button to 

activate the Fade-in/out or Wipe-in/out.

NOTE:

You can extend the length of a Wipe or Fader by 
pressing and holding the Recording Start/Stop 
Button.

WIPE/FADER

OFF

: Disables the function. (Factory-preset)

WHITE

 

: Fade in or out with a white 

screen.

BLACK

 

: Fade in or out with a black 

screen.

SLIDE

 

: Wipe in from right to left, or wipe 

out from left to right.

SCROLL

 

: The scene wipes in from the 

bottom to the top of a black screen, or wipes 
out from top to bottom, leaving a black screen. 

1

Set the Power Switch to “REC”.

2

Set the recording mode to “

M

(

 pg. 20)

3

Set “EFFECT”, “PROGRAM AE” or 

“SHUTTER” in “FUNCTION” Menu. (

 pg. 32)

The selected effect will be shown for approx. 
2 seconds before the camcorder returns to the 
menu screen.

NOTES:

Shutter Effects cannot be used during “NIGHT”.

When a subject is too bright or reflective, a 
vertical streak may appear (smear 
phenomenon). Smear phenomenon tends to 
occur when “SPORTS” or any mode of 
“SHUTTER 1/500 – 1/4000” is selected.

PROGRAM AE

OFF

: Disables the function. (Factory-preset)

SPORTS

 

(Variable Shutter Speed: 1/250 – 1/4000):

This setting allows fast-moving images to be 
captured one frame at a time, for vivid, stable 
slow-motion playback. The faster the shutter 
speed, the darker the picture becomes. Use 
the shutter function under good lighting 
conditions.

SNOW

 

: Compensates for subjects that 

may otherwise appear too dark when shooting 
in extremely bright surroundings such as in the 
snow.

SPOTLIGHT

 

: Compensates for subjects 

that may otherwise appear too bright when 
shooting under extremely strong direct lighting 
such as spotlights.

TWILIGHT

 

: Makes evening scenes look 

more natural. White Balance (

 pg. 39) is 

automatically set to “AUTO”. When Twilight is 
chosen, the camcorder automatically adjusts 
the focus from approx. 10 m to infinity. From 
less than 10 m, adjust the focus manually.

NIGHT

 

: Makes dark subjects or areas 

even brighter than they would be under good 
natural lighting. Although the recorded image 
is not grainy, it may look as if it is strobing due 
to the slow shutter speed.
During Night-Scope, it may be difficult to bring 
the camcorder into focus. To prevent this, use 
of a tripod is recommended.

Wipe Or Fader Effects

Program AE, Effects And Shutter 
Effects

GR-D790AS_EN.book  Page 40  Tuesday, January 23, 2007  2:37 PM

Summary of Contents for GR-D790AS





















































Reviews: