background image

VIDEO PLAYBACK

22 

EN

MasterPage: Left

Variable Shuttle Search

Allows variable-speed search in either 
direction during video playback.

1)

During playback, press 

¡

 once or twice for 

forward search, or 

1

  once or twice for 

reverse search.

2)

To resume normal playback, press 

6

.

During playback, press and hold 

¡

 or 

1

The search continues as long as you hold the 
button. Once you release the button, normal 
playback resumes.

A slight mosaic effect appears on the display 
during Shuttle Search. This is not a malfunction.

 

Blank Search

Helps you find where you should start 
recording in the middle of a tape to avoid time 
code interruption. (

 pg. 20)

1)

Perform steps 

1

 – 

3

 in “Normal Playback” 

(

 pg. 21).

2)

Press 

BLANK

.

The “BLANK SEARCH” indication appears and 
the camcorder automatically starts reverse or 
forward search, then stops at the spot which is 
about 3 seconds of tape before the beginning of 
the detected blank portion.

To cancel Blank Search, press 

7

 

or 

BLANK

.

NOTES:

Before starting Blank Search, if the current 
position is at a blank portion, the camcorder 
searches in the reverse direction. If the current 
position is at a recorded portion, the camcorder 
searches in the forward direction.

If the beginning or end of the tape is reached 
during Blank Search, the camcorder stops 
automatically.

A blank portion which is shorter than 5 seconds 
of tape may not be detected.

The detected blank portion may be located 
between recorded scenes. Before you start 
recording, make sure there is no recorded 
scene after the blank portion. 

Playback Snapshot

This camcorder allows you to take snapshots 
during video playback.
Press 

SNAPSHOT

.

1

¡

x-10

x-3

x3

x10

ATTENTION:

During Shuttle 
Search, parts of the 
picture may not be 
clearly visible, 
particularly on the left 
side of the screen.

During Shuttle Search, 
parts of the picture 
may not be clearly 
visible across the 
screen. 

GR-D790AS_EN.book  Page 22  Tuesday, January 23, 2007  2:37 PM

Summary of Contents for GR-D790AS





















































Reviews: