EN
21
VIDEO PLAYBACK
MasterPage: Start_Right
RECORDING & PLA
YBACK
1
Black to S-VIDEO IN (Connect when your
TV/VCR has S-VIDEO in and AV input
connector. In this case, it is not necessary to
connect the yellow video cable.)
2
Yellow to VIDEO IN (Connect when your TV/
VCR has only A/V input connectors).
3
Red to AUDIO R IN*
4
White to AUDIO L IN*
* Not required for watching still images only.
NOTE:
The S-Video cable is optional. Be sure to use the
YTU94146A S-Video cable. Consult the JVC
Service Centre described on the sheet included in
the package for details on its availability. Make
sure to connect the end with a core filter to the
camera.The core filter reduces interference.
1
Make sure all units are turned off.
2
Connect the camcorder to a TV or VCR as
shown in the illustration.
If using a VCR
, go to step
If not
, go to step
3
Connect the VCR output to the TV input,
referring to your VCR’s instruction manual.
4
Turn on the camcorder, the VCR and the
TV.
5
Set the VCR to its AUX input mode, and set
the TV to its VIDEO mode.
6
Start playback on the camcorder.
●
Please set “16:9 OUTPUT” of Playback Menus
so that the image may suit your TV (16:9 TV or
4:3 TV). (
To choose whether or not the following
displays appear on the connected TV
●
Date/Time
Set “DATE/TIME” to “ON” or “OFF” (
●
Time Code
Set “TIME CODE” to “ON” or “OFF” (
●
Indications other than date/time and time code
Set “ON SCREEN” to “OFF”, “LCD” or “LCD/TV”
(
NOTES:
●
It is recommended to use the AC Adapter as
the power supply instead of the battery
pack. (
●
To monitor the picture and sound from the
camcorder without inserting a tape or memory
card, set the camcorder’s Power Switch
to“REC”, then set your TV to the appropriate
input mode.
●
Make sure you adjust the TV sound volume to its
minimum level to avoid a sudden burst of sound
when the camcorder is turned on.
Connections To A TV Or VCR
TV
VCR
To AV
connector
Audio/Video
cable
(provided)
S-Cable
(optional)
or
GR-D750AH_EN.book Page 21 Tuesday, January 9, 2007 7:47 PM
