MENUS FOR DETAILED ADJUSTMENT
ADV
A
N
C
ED
F
E
A
T
UR
ES
EN
27
MasterPage: Advan_Right
this mode, refer to your wide-screen TV’s instruction
manual. During playback/recording on 4:3 TVs/LCD
monitor/viewfinder, the image is elongated vertically.
* Available only when the
VIDEO/MEMORY
Switch is set to
“VIDEO”.
[OFF]
: Disengages the function.
ON
: Helps cut down on noise created by wind. The
“
” indicator appears. The quality of the sound will
change. This is normal.
SYSTEM
The “
s
” functions which are set when the Power Switch
is set to “
M
” are also applied when the Power Switch is
set to “PLAY”.
[ ]
= Factory-preset
OFF
: Turns off sounds when performing any operations.
It also deactivates the shutter sound effect, however the
shutter sound is recorded onto the tape during Snapshot
for Video Recording (
墌
pg. 31).
BEEP
: The beep sounds when the power is turned on or
off, and at the beginning and end of recording. It also
activates the shutter sound effect. (
墌
pg. 18, 31)
[MELODY]
: Instead of a beep, a melody sounds when
any operation is performed. It also activates the shutter
sound effect. (
墌
pg. 18, 31)
OFF
: Disables the remote control operations.
[ON]
: Enables the remote control operations.
OFF
: Automatic demonstration will not take place.
[ON]
: Demonstrates certain functions such as Program
AE with special effects, etc., and can be used to confirm
how these functions operate. Demonstration starts in the
following cases:
●
When the Menu Screen is closed after “DEMO MODE” is
turned “ON”.
●
With “DEMO MODE” set to “ON”, if there is no operation for
about 3 minutes after the Power Switch is set to “
A
” or “
M
”.
Performing any operation during the demonstration stops
the demonstration temporarily. If no operation is
performed for more than 3 minutes after that, the
demonstration will resume.
NOTES:
●
If a cassette is in the camcorder, the demonstration cannot
be turned on.
●
“DEMO MODE” remains “ON” even if the camcorder power
is turned off.
●
If “DEMO MODE” remains “ON”, some functions will not be
available. After viewing demo, set to “OFF”.
[LCD]
: The image is displayed on the LCD monitor when
the viewfinder is pulled out while the LCD monitor is
opened.
FINDER
: The image is displayed in the viewfinder when
the viewfinder is pulled out while the LCD monitor is
opened.
EXECUTE
: Resets all settings to the factory-preset.
RETURN
: Does not reset all settings to the factory-
preset.
CAMERA DISPLAY
●
The “
n
” (CAMERA DISPLAY) settings are effective even
when the Power Switch is set to “
A
”. However, the menu
settings can be changed only when the Power Switch is set
to “
M
”.
●
The “
n
” (CAMERA DISPLAY) settings are effective only
for shooting except “BRIGHT”.
[ ]
= Factory-preset
墌
pg. 9, “Brightness Adjustment Of The Display”
LCD
: Keeps the camcorder’s display (except the date,
time and time code) from appearing on the connected TV
screen.
[LCD/TV]
: Makes the camcorder’s display appear on
screen when the camcorder is connected to a TV.
OFF
: The date/time does not appear.
[AUTO]
: Displays the date/time for approx. 5 seconds
when the Power Switch is set from “OFF” to “
A
” or “
M
”.
ON
: The date/time is always displayed.
●
The date indication can also be turned on/off by pressing
the
DISPLAY
Button on the remote control. (
墌
pg. 17, 34)
[OFF]
: Time code is not displayed.
ON
: Time code is displayed on the camcorder and on the
connected TV. Frame numbers are not displayed during
recording. (
墌
pg. 13)
墌
pg. 8, “Date/Time Settings”
DSC
[ ]
= Factory-preset
[FINE]
/
STANDARD
The Picture Quality mode can be selected to best match
your needs. Two Picture Quality modes are available:
FINE (
) and STANDARD (
) (in order of quality).
NOTE:
The number of storable images depends on the selected
picture quality as well as the composition of the subjects in
the images and the type of memory card being used.
(
墌
pg. 18)
WIND CUT
BEEP
REMOTE
DEMO MODE
PRIORITY
CAM RESET
BRIGHT
ON SCREEN
DATE/TIME
TIME CODE
CLOCK ADJ.
QUALITY
GR-D94US.book Page 27 Monday, November 17, 2003 2:12 PM
