JVC GR-D650AA, Instructions Manual

Page: 34 / 56

MENUS FOR DETAILED ADJUSTMENT
34
EN
MasterPage: Left
OFF : Allows you to shoot dark scenes with no
picture brightness adjustment.
[AGC] : The overall appearance may be grainy,
but the image is bright.
AUTO : The shutter speed is automatically
adjusted. Shooting a subject in low or poor
lighting at slow shutter speed provides a brighter
image than in the AGC mode, but the subject’s
movements are not smooth or natural. The
overall appearance may be grainy. While the
shutter speed is being automatically adjusted,
“
” is displayed.
[OFF] : Disengages the function.
ON : Helps cut down on noise created by
wind. The “ ” indicator appears. The quality of
the sound will change. This is normal.
To enable your tv to display images in 16:9 wide
mode, set the tv screen size correctly.
[4:3TV]: For TV with an aspect ratio of 4:3
16:9TV: For TV with an aspect ratio of 16:9
SYSTEM
The “SYSTEM” functions which are set when the
Power Switch is set to “REC” are also applied
when the Power switch is set to “PLAY”.
[ ] = Factory-preset.
OFF : Even though not heard while shooting,
shutter sound is recorded on the tape.
[ON] : A melody sounds when any operation is
performed. It also activates the shutter sound
effect. (
墌
pg. 37)
[RETURN] : Does not reset all settings to the
factory-preset.
EXECUTE : Resets all settings to the factory-
preset.
[LCD] : The image is displayed on the LCD
monitor when the viewfinder is pulled out while
the LCD monitor is opened.
FINDER : The image is displayed in the
viewfinder when the viewfinder is pulled out
while the LCD monitor is opened.
OFF : Disables the remote control operations.
[ON] : Enables the remote control operations.
DISPLAY
●
The menu settings can be changed only when the
Power Switch is set to “REC”.
●
The DISPLAY settings except “BRIGHT” and
“LANGUAGE” are effective only for shooting.
[ ] = Factory-preset
墌
pg. 17, “Brightness Adjustment Of The
Display”
墌
pg. 16, “Date/Time Settings”
[ENGLISH] / FRANÇAIS / DEUTSCH /
ESPAÑOL / ITALIANO / NEDERLANDS /
PORTUGUÊS /
РУССКИЙ / POLSKI /
ČEŠTINA
The language setting can be changed.
(
墌
pg. 16)
[OFF] : The date/time does not appear.
ON : The date/time is always displayed.
LCD : Keeps the camcorder’s display (except the
date, time and time code) from appearing on the
connected TV screen.
[LCD/TV] : Makes the camcorder’s display
appear on screen when the camcorder is
connected to a TV.
[OFF] : Time code is not displayed.
ON : Time code is displayed on the camcorder
and on the connected TV. Frame numbers are
not displayed during recording. (
墌
pg. 22)
OFF : Automatic demonstration will not take
place.
[ON] : Demonstrates certain functions such as
Wipe/Fader and Effect, etc., and can be used to
confirm how these functions operate.
Demonstration starts in the following cases:
●
When the Menu Screen is closed after “DEMO
MODE” is turned “ON”.
●
With “DEMO MODE” set to “ON”, if there is no
operation for about 3 minutes after the Power
Switch is set to
“REC”
.
GAIN UP
WIND CUT
16:9
MELODY
CAM RESET
PRIORITY
AGC
TV
REMOTE
BRIGHT
CLOCK ADJ.
LANGUAGE
DATE/TIME
ON SCREEN
TIME CODE
DEMO MODE
DEMO
GR-D650AA.book Page 34 Tuesday, May 30, 2006 9:31 AM