EN
31
USING MENUS FOR DETAILED ADJUSTMENT
TIME CODE
[OFF]:
Time code is not displayed.
ON:
Time code is displayed on the camcorder and on
the connected TV. Frame numbers are not displayed
during recording.
CLOCK ADJ.
Allows you to set the current date and time (
墌
pg. 10).
DSC
QUALITY , IMAGE SIZE
Refer to “Picture Quality/Image Size Setting”
(
墌
pg. 11).
REC SELECT
[
]:
When Snapshot recording is performed
with the
VIDEO/MEMORY
Switch
4
set to “VIDEO”,
still images are recorded only onto the tape.
/
:
When Snapshot recording is
performed with the
VIDEO/MEMORY
Switch
4
set to
“VIDEO”, still images are recorded not only onto the
tape but also on the memory card (640 x 480 pixels).
In this mode, the “SNAP MODE” selection in the
CAMERA Menu is also applicable to memory card
recording.
VIDEO
SOUND MODE
........
墌
pg. 32, “Playback Sound”.
12bit MODE
........
墌
pg. 32, “Playback Sound”.
SYNCHRO
........
墌
pg. 39, “For More
Accurate Editing”.
REC MODE
Allows you to set the tape recording mode ([SP] or
LP) depending on your preference (
墌
pg. 10).
It is recommended you use “REC MODE” in the
“
VIDEO” Menu when using this camcorder as a
recorder during dubbing (
墌
pg. 33, 34).
• “REC MODE” can be set when the Power Switch
u
is
set to “PLAY” or “
” (
墌
pg. 10, 28).
COPY
ON:
Enables dubbing of images recorded on a tape
to a memory card (
墌
pg. 21).
[OFF]:
Enables snapshots to be taken during tape
playback.
S/AV INPUT
ON:
Enables audio/video signal input from the AV and
S-VIDEO connectors (
墌
pg. 33).
[OFF]:
Enables audio/video signal output to a TV,
VCR, etc. via the AV and S-VIDEO connectors
(
墌
pg. 16, 33).
• When “S/AV INPUT” is set to “ON”, camcorder
playback cannot be viewed on the AV output.
–
RETURN
–
–
DSC
TY
QUAL I
REC SELECT
F I NE
02
1
X7
4
8
6
I MAGE S I ZE
–
–
–
–
–
–
I
V DEO
M D
O E
SOUND
M D
O E
12 b i t
RO
SYNCH
ODE
REC M
COPY
STEREO
SOUND 1
OF F
OF F
O . O
NPUT
S / AV I
RETURN
MELODY
EEP
B
–
RETURN
AM RESET
C
LCD
R I OR I TY
P
–
ON
EMO MODE
D
–
ON
EMOTE
R
–
ON
AL LY
T
–
S
Y
S
TEM
For Playback Menu
The following procedure applies to all except Synchro
Comp (
墌
pg. 39).
1
Set the
VIDEO/MEMORY
Switch
4
to “VIDEO”,
then set the Power Switch
u
to “PLAY” while pressing
down the Lock Button
y
located on the switch.
2
Press the
MENU/VOLUME
wheel
%
in. The Menu
Screen appears.
3
Rotate the
MENU/VOLUME
wheel
%
to select the
desired function menu, and press it.
4
Rotate the
MENU/VOLUME
wheel
%
to select the
desired function, and press it to display the Sub Menu.
5
Rotate the
MENU/VOLUME
wheel
%
to select the
desired parameter and press it. Selection is complete.
6
Rotate the
MENU/VOLUME
wheel
%
to select
“
RETURN” and press it twice to close the Menu
Screen.
SYSTEM
Each setting is linked with “
SYSTEM”, which
appears when the Power Switch
u
is set to “
”
(
墌
pg. 30).
The parameters are the same as in the description on
pg. 30.
[ ] = Factory-preset
1 GR-D90/70A EN 23-34
03.2.4, 17:07
31
