background image

MENUS FOR DETAILED ADJUSTMENT

16 

EN

MasterPage: Left

SYSTEM

The “

s

” functions which are set when the Power Switch 

is set to “

M

” are also applied when the Power Switch is 

set to “PLAY”.

[  ]

 = Factory-preset 

OFF

: Turns off sounds when performing any operations. 

It also deactivates the shutter sound effect, however the 
shutter sound is recorded onto the tape during Snapshot 
for Video Recording (

pg. 20).

BEEP

: The beep sounds when the power is turned on or 

off, and at the beginning and end of recording. It also 
activates the shutter sound effect. (

pg. 20)

[MELODY]

: Instead of a beep, a melody sounds when 

any operation is performed. It also activates the shutter 
sound effect. (

pg. 20)

OFF

: Disables the remote control operations.

[ON]

: Enables the remote control operations.

It is recommended that this function be set to “OFF” to 
prevent improper operation. 

OFF

: Automatic demonstration will not take place.

[ON]

: Demonstrates certain functions such as Program 

AE with special effects, etc., and can be used to confirm 
how these functions operate. Demonstration starts in the 
following cases:

When the Menu Screen is closed after “DEMO MODE” is 
turned “ON”.

With “DEMO MODE” set to “ON”, if there is no operation for 
about 3 minutes after the Power Switch is set to “

A

” or “

M

”. 

Performing any operation during the demonstration stops 
the demonstration temporarily. If no operation is 
performed for more than 3 minutes after that, the 
demonstration will resume.

NOTES:

If a cassette is in the camcorder, the demonstration cannot 
be turned on.

“DEMO MODE” remains “ON” even if the camcorder power 
is turned off.

If “DEMO MODE” remains “ON”, some functions will not be 
available. After viewing demo, set to “OFF”.

[LCD]

: The image is displayed on the LCD monitor when 

the viewfinder is pulled out while the LCD monitor is 
opened.

FINDER

: The image is displayed in the viewfinder when 

the viewfinder is pulled out while the LCD monitor is 
opened. 

EXECUTE

: Resets all settings to the factory-preset.

RETURN

: Does not reset all settings to the factory-

preset.

CAMERA DISPLAY

The “

n

” (CAMERA DISPLAY) settings are effective even 

when the Power Switch is set to “

A

”. However, the menu 

settings can be changed only when the Power Switch is set 
to “

M

”.

The “

n

” (CAMERA DISPLAY) settings are effective only 

for shooting except “BRIGHT”.

[  ]

 = Factory-preset 

pg. 9, “Brightness Adjustment Of The Display”  

LCD

: Keeps the camcorder’s display (except the date, 

time and time code) from appearing on the connected TV 
screen.

[LCD/TV]

: Makes the camcorder’s display appear on 

screen when the camcorder is connected to a TV. 

OFF

: The date/time does not appear.

[AUTO]

: Displays the date/time for approx. 5 seconds 

when the Power Switch is set from “OFF” to “

A

” or “

M

”.

ON

: The date/time is always displayed.

[OFF]

: Time code is not displayed.

ON

: Time code is displayed on the camcorder and on the 

connected TV. Frame numbers are not displayed during 
recording. (

pg. 11) 

pg. 8, “Date/Time Settings” 

BEEP

REMOTE

DEMO MODE

PRIORITY

CAM RESET

BRIGHT

ON SCREEN

DATE/TIME

TIME CODE

CLOCK ADJ.

GR-D47AG.book  Page 16  Thursday, January 27, 2005  4:40 PM

Summary of Contents for GR-D47









































Reviews: