EN
23
,,,,,
,,,,
,,,,
,,,,,
,,,,
,,,,,
,,,,,
,,,,
,,,,
,,,,,
,,,,
,,,,,
FINE 12
30
29
1
0
,,,
,,,,
,,,
,,,,
NOTES:
●
The remaining number of shots varies according to the
selected Picture Mode. In the “STANDARD” mode,
twice as many still images can be shot as in the “FINE”
mode.
●
Some sample images have been stored in the built-in
memory at the factory.
If you wish to delete them, first remove the “Protect”
function (
Z
pg. 57), then perform the “Delete” function
(
Z
pg. 58).
●
When the Power Switch is set to “AUTO”, it is not
possible to select the Snapshot mode. You can use the
Snapshot mode you selected in the “PRO.” mode.
●
If a Snapshot is taken while the camcorder is in the
WIDE mode (
Z
pg. 37), the Snapshot image is recorded
without the black bars at the top and bottom of the
screen.
Pictrue mode
display
Remaining number
of shots
(Blinking)
FULL*
(Snapshot mode with
no frame)
M. DRIVE
u
(Motor Drive mode)
PIN-UP*
(Pin-Up mode)
MULTI-4 **
(Multi-Analyzer 4)
MULTI-9**
(Multi-Analyzer 9)
* There is a momentary camera shutter-type blackout
together with the image.
** Continuous camera shutter-type blackout takes place 4
or 9 times with the image, like serial photography, then
the 4 or 9 still images you took are displayed.
u
Stores 6 still images continuously for approx. 2 seconds.
During still image storage, “MD” blinks and the 6 still
images are displayed in the order that you took them.
There is no sound effect of a shutter closing.
CONTINUED ON NEXT PAGE
Summary of Contents for GR-AXM910
Page 83: ...EN83 MEMO ...
