JVC GR-AXM900 Instructions Manual Download Page 43

Page: 43 / 92

VIDEO PLAYBACK

Features

Adjust the brightness of the LCD monitor

To brighten the image, turn the BRIGHT Dial toward “+”.
To darken the image, turn the Dial toward “–”.

Speaker volume control

You can adjust the speaker volume by turning the
VOLUME Dial.

ADJUST VOLUME

If you want to turn up the volume . . .

Turn the Dial toward “+”.

If you want to turn down the volume . . .

Turn the Dial toward “–”.

NOTE:

When the LCD monitor is turned off, sound is not heard
from the speaker.

Tracking

This function can be used to eliminate noise bars that
appear on-screen during playback. Initial setting is Auto
Tracking. Manual Tracking is also available.

ACTIVATE MANUAL TRACKING

Press the MENU Jog Dial during playback mode.
Keep rotating it until noise bars disappear.

•To return to Auto Tracking, press the MENU Jog

Dial. “AT” blinks. When Auto Tracking finishes,
the indication disappears.

NOTES:

●

When noise bars appear during playback, the
camcorder enters the Auto Tracking mode and “AT” is
displayed.

●

Manual Tracking may not work with tapes recorded on
other VCRs or camcorders.

VOLUME

BRIGHT

MENU Jog Dial

Speaker

Summary of Contents for GR-AXM900





























































































Search results

Summary of Contents for GR-AXM900

Reviews:

Related manuals for GR-AXM900

Brands by name

Popular brands

JVC GR-AXM900, Instructions Manual

Search results

Summary of Contents for GR-AXM900

Reviews:

Related manuals for GR-AXM900

Brands by name

Popular brands