EN
49
MENU
4
MENU END
FOCUS
EXPOSURE
DATE TIME
TELE MACRO
PICTURE
M. W. B.
ZOOM SPEED
4
NEXT
AUTO
AUTO
DEC
OFF
FINE
AUTO
FAST
25. 98
PICTURE
FINE
STANDARD
EXIT
FEATURE:
Picture Mode Setting
PURPOSE:
There are two image settings you can
choose from when storing in the
camcorder’s memory: FINE and
STANDARD. You can select either
according to your needs.
OPERATION:
1) ACCESS MENU SCREEN
Turn the Select Dial to any
position except AUTO LOCK.
Press the MENU Jog Dial.
2) SELECT FUNCTION
Rotate the MENU Jog Dial to move
the highlight bar to “PICTURE”,
then press it. The Picture Mode
Setting Menu appears.
3) SET PICTURE MODE
Rotate the MENU Jog Dial to move
the highlight bar to the desired
setting (FINE or STANDARD).
n
Factory-preset is “FINE”.
n
If you want the Picture Mode to
return to the previous setting,
rotate the MENU Jog Dial to
move the highlight bar to “EXIT”.
4) CLOSE MENU
Press the MENU Jog Dial. The
Menu Screen reappears and the
highlight bar is on “MENU END”.
Then press the MENU Jog Dial
again to close the Menu Screen.
“STD” is displayed with STAND-
ARD selected, and “FINE” is
displayed with FINE selected.
NOTES:
●
To store the still images you shot, we recommend that you transfer them to a computer and save them
on disk (
Z
pg. 63).
●
When the Power Switch is set to “CAMERA” and the LCD monitor is opened at an angle of 45 degrees
or more, the LCD monitor switches on and the viewfinder switches off automatically to save power.
When you use the LCD monitor outdoors in direct sunlight, the LCD monitor may be difficult to see. If
this happens, we recommend that you use the viewfinder.
●
When the remaining number indicator displays “0” (blinking), it is not possible to continue storing
pictures until you delete some shots to make room for new ones. Perform “DELETE” function in the
Menu Screen to remove pictures you do not need (
Z
pg. 60).
●
The Picture Mode can be switched to either “FINE”or “STANDARD”. Since the remaining number of
shots available depends on the selected Picture Mode, switching the Picture Mode will vary this
number.
●
The LENS COVER warning blinks for approx. 5 seconds when the camcorder is turned on when the
cover is closed.
●
When the SNAPSHOT Button is pressed with the System Select Switch set to “VIDEO”, the picture is
stored not only in the camcorder's built-in memory but also onto the tape (if a tape is in the camcorder)
(
Z
pg. 26).
●
When you shoot in a dark environment, the still image will become coarse and its true colors will be
lost.
MENU Jog Dial
Picture Mode Setting Menu
Menu Screen
LCD monitor or viewfinder
Select Dial
Set to “D.S.C.”
