8
EN
GETTING STARTED
**REFRESH
The AC power adapter features a REFRESH
function that allows you to fully discharge the
battery pack before recharging.
To discharge the battery . . .
..... attach the battery pack to the adapter as
shown in the above illustration. Then push
REFRESH. The REFRESH indicator lights
when discharging starts, and goes out
when discharging is complete.
Power
This camcorder’s 3-way power supply system lets you
choose the most appropriate source of power.
NOTES:
●
No function is available without power supply.
●
Use only specified power supply.
●
Do not use provided power supply units with other
equipment.
CHARGING THE BATTERY PACK
SUPPLY POWER
1
Connect the charger’s AC power cord to a wall
outlet. The power indicator lights.
ATTACH BATTERY PACK
2
Align the marks and slide the battery pack in the
direction of the arrow until it locks in place.
The CHG. indicator lights.
DETACH BATTERY PACK
3
When charging is completed, the END indicator
lights. Slide the battery pack opposite the direction of
the arrow.
Approximate recording time (unit: min.)
USING THE BATTERY PACK
ATTACH BATTERY PACK
1
Hook its top end to the camcorder and push the
battery pack in until it locks in place.
DETACH BATTERY PACK
2
Slide BATT. RELEASE and pull out the battery pack.
BATT. PACK
CHARGE
DISCHARGE
BN-V11U
approx. 1 hr. 10 min.
approx.
3 hrs. 30 min.
BN-V12U
approx. 1 hr. 10 min.
approx.
3 hrs. 30 min.
BN-V22U
approx. 2 hrs. 10 min.
approx. 7 hrs.
BN-V25U
approx. 2 hrs. 40 min.
approx. 10 hrs.
BATT.
LCD monitor on/
LCD monitor off/
PACK
Viewfinder off
Viewfinder on
BN-V11U
45
55
BN-V12U
45
55
BN-V22U
100
115
BN-V25U
135
155
ATTENTION:
Before detaching the power source,
make sure that the camcorder’s power
is turned off. Failure to do so can result
in a camcorder malfunction.
REFRESH indicator
REFRESH switch
To AC outlet
POWER
indicator
END
indicator
CHG. (charge) indicator
Marks
1
1
2
BATT. RELEASE
Hook on.
Push in.
