JVC GR-AXM205 Instructions Manual Download

Page: 18 / 60

PAUSE

RECORDING

Basic Features (cont.)

P. STABILIZER Button

Power Switch

FEATURE:

Picture Stabilizer

PURPOSE:

To compensate for unstable images caused by camera-
shake, particularly at high magnification.

OPERATION:

1) Press P. STABILIZER. “

”appears.

To switch off the Picture Stabilizer, press
P. STABILIZER. The indicator disappears.

NOTES:

●

Accurate stabilisation may not be possible if hand
shake is excessive, or under the following condi-
tions:

•

When shooting subjects with vertical or horizontal
stripes.

•

When shooting dark or dim subjects.

•

When shooting subjects with excessive
backlighting.

•

When shooting scenes with movement in various
directions.

•

When shooting scenes with low-contrast back-
grounds.

●

Switch off the Picture Stabilizer when recording
with the camcorder on a tripod.

●

The “

” indicator appears blinking if the

Stabilizer cannot be used.

FEATURE:

5Sec. Rec (5-sec. Recording)

(GR-AXM205 only)

PURPOSE:

To record a scene for 5 seconds, providing quick scene
transitions like those seen in TV programmes.

OPERATION:

1) During Record–Standby, press 5SEC. REC. “

5S”

appears and 5Sec. Rec is reserved.

2) Press the Recording Start/Stop Button. Recording

starts, and after 5-second recording is finished, the
camcorder reenters the Record–Standby mode
automatically.

To cancel the 5Sec. Rec. function, press 5SEC. REC
again so that “

5S” disappears.

NOTE:

Fade/Wipe (

pg. 21) cannot be activated by

pressing 5SEC. REC.

Display

Picture stabilizer indicator

5 SEC. REC Button

5 Sec. Rec mode indicator

Summary of Contents for GR-AXM205





























































Search results

Summary of Contents for GR-AXM205

Reviews:

Related manuals for GR-AXM205

Brands by name

Popular brands

JVC GR-AXM205, Instructions Manual

Search results

Summary of Contents for GR-AXM205

Reviews:

Related manuals for GR-AXM205

Brands by name

Popular brands