JVC GR-AX999UM Instructions Manual Download Page 71

Page: 71 / 88

USER MAINTENANCE

LENS COVER
Open/Close Switch

Set to “POWER OFF”.

BATT. RELEASE

PUSH

EJECT

Remove.

Marks

After Use

Set the Power Switch to “POWER OFF” to turn off
the camcorder.

Slide EJECT to open the cassette holder, then remove
the cassette.

Close and lock the cassette holder by pressing
PUSH.

Slide BATT. RELEASE to remove the battery pack.

Slide the LENS COVER Open/Close switch to close
the lens cover.

Cleaning The Camcorder

CLEAN EXTERIOR

Wipe gently with a soft cloth.

CLEAN LENS

Blow it with a blower brush, then wipe gently with
lens cleaning paper.

CLEAN VIEWFINDER

Turn the eyepiece counterclockwise and pull
it out.

Remove dust using a blower brush.

Align the marks, re-attach the eyepiece and turn
it clockwise.

NOTES:

●

Avoid using strong cleaning agents such as benzine or
alcohol.

●

Cleaning should be done only after the battery pack
has been removed or other power units have been
disconnected.

●

Mould may form if the lens is left dirty.

Summary of Contents for GR-AX999UM
























































































Search results

Summary of Contents for GR-AX999UM

Reviews:

Brands by name

Popular brands

JVC GR-AX999UM, Instructions Manual

Search results

Summary of Contents for GR-AX999UM

Reviews:

Brands by name

Popular brands