background image

16

DIAL

VIEWFINDER

MODE

SYMBOL

INDICATION

Electronic Fog Filter
Makes the picture look misty white, as when an
external fog filter is attached to the lens. Softens the
image and gives it a “fancy“ look.

ND Effect
A black mist darkens the picture, as when an ND
filter is used. Helps to counter the effects of glare on
the subject.

RECORDING

  Advanced Features

DIAL

VIEWFINDER

MODE

SYMBOL

INDICATION

Auto Mode Lock
Locks the camcorder in Full Auto mode, preventing
incorrect operation due to accidental button
pressing during shooting.
• In this mode the following controls are disabled;

FADE, WIDE, TITLE, DISPLAY, M.W.B (Manual
White Balance), Manual Focus, Focus Lock,
Exposure Control and MENU

Auto Mode Release
Re-enables the controls that were disabled by Auto
Mode Lock.

Auto Mode Lock

LOCK

AUTO LOCK

Auto Mode 
Release

RELEASE

AUTO RELEASE

Electronic Fog Filter

FG:FOG

FG

ND Effect

ND:ND EFFECT

ND

Programme AE With Special Effects

All you have to do to access any of the variety of
shooting effects is to turn the PROGRAM AE select
dial.

SELECT MODE

1

Turn the PROGRAM AE select dial until the
symbol of the function you want is aligned
with the mark.

•The selected mode's name and its indication

are displayed in the viewfinder for approx.
1 second. Then the name disappears, and
only the indication remains. The mode is
activated.

•When Auto Mode Lock or Auto Mode

Release mode is selected, only the mode's
name is displayed. Then the name disappears
and the mode is activated.

NOTES:

Only one effect can be engaged at a time.

The screen becomes slightly reddish when the
fader (

Z

 pg. 20) is used in the Sepia mode.

The screen becomes slightly dark in the High
Speed Shutter mode. Use in well-lit situations.

In the High Speed Shutter or Sports modes,
picture colour may be adversely affected if
subject is lit by alternating discharge-type light
sources such as fluorescent or mercury-vapour
lights.

1

/1

0

0

0

1/

20

00

F

G

N

D

AUTO M

OD

E

LOCK REL

EA

SE

FAR NEAR

+

SEPIA

Mark

PROGRAM AE
select dial

1 second later, the mode is activated.

After
1 sec.

Viewfinder

Summary of Contents for GR-AX475





















































Reviews: