JVC GET0199-001A Instructions Manual Download Page 107

Page: 107 / 124

ENGLISH

Selecting the playback modes

To play back tracks/files at random
(Folder Random/Disc Random/Magazine
Random Play)

Press MODE to enter the
functions mode while playing a
disc.

Press RND (random), while
“MODE” is still on the display.
Each time you press the button,
the random play mode changes
as follows:

For MP3 discs:

For CDs:

Note:

MP3 indicator also lights up if the current playing
disc is an MP3 disc.

RND indicator

Ex.: When you select “MAG RND”

Mode

Active

Plays at random

indicator

FLDR RND*

and RND

All files of the

indicators

current folder, then

light up.

files of the next
folder and so on.

DISC RND

and RND All tracks/files of the

indicators

current (or specified)

light up.

disc.

MAG RND

RND indicator All tracks/files of the
lights up.

inserted discs.

“FLDR RND” is only applicable for MP3 disc.

To play back tracks/files repeatedly
(Track Repeat/Folder Repeat/Disc Repeat
Play)

Press MODE to enter the
functions mode while playing a
disc.

Press RPT (repeat), while
“MODE” is still on the display.
Each time you press the button,
the repeat play mode changes
as follows:

For MP3 discs:

For CDs:

Note:

MP3 indicator also lights up if the current playing
disc is an MP3 disc.

(disc) and RPT indicators

Ex.: When you select “DISC RPT”

MAG RND

DISC RND

FLDR RND

Canceled

MAG RND

DISC RND

Canceled

TRK RPT

DISC RPT

TRK RPT

FLDR RPT

Canceled

EN42-46_KD-G807[EE]f.p65

1/15/04, 2:11 PM

Summary of Contents for GET0199-001A





























































































































Search results

Summary of Contents for GET0199-001A

Reviews:

Related manuals for GET0199-001A

Brands by name

Popular brands

JVC GET0199-001A, Instructions Manual

Search results

Summary of Contents for GET0199-001A

Reviews:

Related manuals for GET0199-001A

Brands by name

Popular brands