28
ENGLISH
To turn the tag display on or off—TAG DISP
An MP3/WMA file can contain file information
called “ID3 Tag” where its album name,
performer, track title, etc. are recorded.
There are two versions–ID3v1 (ID3 Tag version
1) and ID3v2 (ID3 Tag version 2). If both ID3v1
and ID3v2 are recorded on a disc, ID3v2
information will be shown.
When shipped from the factory, "TAG ON" is
selected.
• TAG ON:
Turns on the ID3 tag display while
playing MP3/WMA files.
• If an MP3/WMA file does not
have ID3 tags, folder name and
file name appear.
• TAG OFF:
Turns off the ID3 tag display while
playing MP3/WMA files. (Only the
folder name and file name can be
shown.)
To select the amplifier gain control
—AMP GAIN
You can change the maximum volume level of
this unit. When the maximum power of the
speakers is less than 50 W, select "LOW PWR"
to prevent them from being damaged.
When shipped from the factory, “HIGH PWR” is
selected.
• LOW PWR: You can adjust the volume level
from “VOL 00” to “VOL 30.”
Note:
If you change the initial setting from
“HIGH PWR” to “LOW PWR” while
listening at a volume level more than
30, the unit automatically changes
the volume level to “VOL 30.”
• HIGH PWR: You can adjust the volume level
from “VOL 00” to “VOL 50.”
To select the scroll mode—SCROLL
You can select the scroll mode for the disc
information (when the entire text cannot be
shown all at once).
When shipped from the factory, scroll mode is set
to “ONCE.”
• ONCE:
Scrolls only once.
• AUTO:
Repeats the scroll (5-second
intervals in between).
• OFF:
Cancels scroll mode.
Note:
Even if the scroll mode is set to “OFF,” you can scroll
the display by pressing DISP (display) for more than
one second.
To select the external component to use
—EXT IN
You can connect the external component to the
CD changer jack on the rear using the Line Input
Adapter KS-U57 (not supplied).
To use the external component as the playback
source through this unit, you need to select
which component—CD changer or external
component—to use.
When shipped from the factory, CD changer is
selected as the external component.
• CHANGER: To use the CD changer.
• LINE IN:
To use the external component
other than CD changer.
Note:
For connecting the Line Input Adapter KS-U57 and
the external component, refer to the Installation/
Connection Manual (separate volume).
EN25_32_KD_SC605[U].P65
9/29/03, 1:18 PM
28
