background image

23

ENGLISH

Prohibiting disc ejection

You can prohibit disc ejection and can lock a disc
in the loading slot.

While pressing CD CD-CH (AUX), press
and hold 

 for more than 2 seconds.

“NO EJECT” flashes on the display for about
5 seconds, and the disc is locked and cannot be
ejected.

To cancel the prohibition and unlock the disc

While pressing CD CD-CH (AUX), press and
hold 

 again for more than 2 seconds.

“EJECT OK” flashes on the display for about
5 seconds, and the disc is unlocked.

Playing a CD Text

In a CD Text, some information about the disc (its
disc title, performer, and track title) is recorded.
This CD Text information will be shown
automatically when you play a CD Text.

To change the CD Text information
manually, select text display mode while
playing a CD Text.

Each time you press the button,
the display changes as follows:

Notes:

• The display shows up to 8 characters at one time

and scrolls if there are more than 8 characters.
See also “To select the scroll mode—SCROLL” on
page 35.
Some characters or symbols will not be shown (and
be blanked) on the display.
(Ex. “ABCå!d#” 

]

“ABCA  D  ”)

• When you press DISP (display) while playing a

conventional CD, “NO NAME” appears for the
disc title/performer and the track title.

Disc title / performer 

Track title 

(    lights up on the display)

Elapsed playing time and 

Current track number

EN20-23KD-SX998R[E_EX]f.p65

1/10/03, 12:04 PM

23

Summary of Contents for GET0125-001A

























































Reviews: