background image

20

ENGLISH

To go to the next track or the previous tracks

To go to a particular disc directly

Press the number button corresponding to the disc
number to start its playback (while the CD changer
is playing).

• To select a disc number from 1 – 6:

Press 1 (7) – 6 (12) briefly.

• To select a disc number from 7 – 12:

Press and hold 1 (7) – 6 (12) for more than 1
second.

Ex. When disc number 3 is selected

Press 

 

¢

 briefly, while

playing a CD, to go ahead to
the beginning of the next track.
Each time you press the button
consecutivelys, the beginning of
the next tracks is located and
played back.

4

¢

Press

  4

 

 briefly, while

playing a CD, to go back to the
beginning of the current track.
Each time you press the button
consecutively, the beginning of
the previous tracks is located
and played back.

Selecting CD playback modes

To play back tracks at random (Random Play)

1

Press MODE to enter the functions mode
while playing a CD. This unit enters the
functions mode.

2

Press RND (random), while still in the
functions mode, so that the RND indicator
lights up on the display.

Then, each time you press RND, the random
play mode changes as follows:

RND1

Lights

All tracks of the current

(random1)

disc, then the tracks of
the next disc, and so on.

RND2

Flashes

All tracks of all discs

(random2)

inserted in the magazine.

To play back tracks repeatedly (Repeat Play)

1

Press MODE to enter the functions mode
while playing a CD. This unit enters the
functions mode.

2

Press RPT (repeat), while still in the functions
mode, so that the RPT indicator lights up on
the display.

Then, each time you press RPT, the repeat play
mode changes as follows:

MODE

12

RND

RND1

RND2

Canceled

Mode

Plays at random

RND
Indicator

MODE

11

RPT

RPT1

RPT2

Canceled

Mode

Plays
repeatedly

RPT
Indicator

RPT1

Lights

The current track (or

(repeat1)

specified track).

RPT2

Flashes

All tracks of the current

(repeat2)

disc (or specified disc).

Disc number

Track number

8

9

10

11

12

7

RND

RPT

MO

EN19-20KS-FX711/KS-FX511[U]f

3/1/02, 9:53

20

Summary of Contents for GET0063-001A

































Reviews: