Procedures:
1. Get the camera ready. (Refer to “
Getting Started
”)
2. Toggle on the [MODE] button to select the Video Clip Mode [
].
3. Adjust the Normal
/Macro switch dial to either Normal
or Macro to suit the distance of the subject.
4. Press the shutter button to start recording.
5. Press the shutter button again to stop recording.
6. To continue shooting, repeat the above steps 4 to 5.
4. [Rec] icon
Appears when recording Video Clip to indicate that recording is in progress.
5. EV Level Indicator
Adjust the EV Level by EV & White Balance setting, and the adjusted value will be displayed.
[-2.0 - +2.0]
It is not displayed at default value [0].
6. White Balance Indicator
Adjust the White Balance by EV & White Balance setting, and the adjusted value will be displayed.
[
]
It is not displayed at default value “AUTO”.
7. Battery Indicator
Battery Life > 40%
20% < Battery Life < 40%
10% < Battery Life < 20%
Battery Life < 10%. Status Led flash 5 sec and then power off.
8. Macro Indicator
It is displayed when the Normal
/Macro switch dial is set to Macro .
When set to Macro, it is possible to focus the camera on the subject in the proximity of about 45 cm.
Shooting Basics
Summary of Contents for GC-A70
Page 33: ......