background image

10

Basic Operations

Fade-out Muting (FADE MUTING)

You can mute the output with one touch operation.

To mute the output,

 press the FADE MUTING button

on the Remote Control. Then, the output will be faded out
and becomes 0.

To release muting,

 press the FADE MUTING button once

again. Then, the output will be faded in to the original level.

Reinforcing the Bass Sound 
(AHB PRO)

You can reinforce the bass sound to maintain rich, full bass
at low volume. 

To get the effect,

 press the AHB (Active Hyper Bass)

PRO button.
The “AHB PRO” indicator lights up on the display.

To cancel the effect,

 press the button again.

The “AHB PRO” indicator goes out. 

Tone Control (BASS/TREBLE)

You can control the tone by changing the bass and treble.

BASS Control 

You can adjust the bass level (low frequency range level)
between –6 and +6. (0: Flat)

1

Press the BASS button on the Remote 
Control.

2

Press the UP or DOWN button on the 
Remote Control to adjust the bass level.

TREBLE Control 

You can adjust the treble level (high frequency range level)
between –6 and +6. (0: Flat)

1

Press the TREBLE button on the 
Remote Control.

2

Press the UP or DOWN button on the 
Remote Control to adjust the treble 
level. 

Showing the Time 
(CLOCK/DISPLAY)

You can show the current time on the display.

To display the clock,

 press the CLOCK button on the

Unit or DISPLAY button on the Remote Control.

To return to the previous mode,

 press the same button

again.

• To let the clock work, you need to set the clock first. (See 

“Setting the Clock” on page 20.)

Sliding the Top Cover
(DOOR SLIDE)

Each time you press the DOOR SLIDE button on the Re-
mote Control, the Top Cover slides back and forth.

Slide the Top Cover backward to allow Unit’s top button
operation. Slide it toward you to cover the buttons.

DOWN

UP

BASS

DOWN

UP

TREBLE

FS-SD5(B).book  Page 10  Tuesday, February 15, 2000  1:13 PM

Summary of Contents for FS-SD5R





























Reviews: