JVC EXAD KD-NX901 Instructions Manual Download Page 10

Page: 10 / 129

ENGLISH

Control panel —

KD-NX901

VOL (volume) +/– button

(eject/angle) button

• Ejects the disc if pressed.

• Changes the control panel angle if pressed

repeatedly after held once.

SEL (select) button

For Navigation System:

• Displays the DESTINATION menu if

pressed.

• Displays the Setup Menu if pressed and

held.

For playback sources:

• Displays the “Select Preset EQ” screen

and sound setting screens if pressed
repeatedly.

• Displays the PSM menu if press and held.

SOURCE button

Control dial/OK button

• Control dial: Selects the items.

• OK button: Confirms the selection.

Remote sensor

Display window

T/P (traffic programme/programme
type) button

• Turns on/off TA Standby Reception if

pressed.

• Turns on/off PTY Standby Reception if

pressed and held.

• Displays the traffic information while in

the navigation mode.

Parts identification

SEL

SOURCE

NAVI / AV

VOL

–

MODE

DISP

REC

BACK

T/P

KD-NX901

(standby/on attenuator) button

• Turns on the power when it is off.

• Attenuates the sound when the power is

on.

• Turns off the power if pressed and held.

DISP (display)/BACK button

• DISP: Changes the display patterns.

• BACK: Goes back to the previous screen

or cancels the setting while operating the
menus.

MODE/REC button

• MODE: Changes the functions of some

buttons.

• REC: Activates the recording mode if

pressed and held while playing a CD.

NAVI/AV button

• Switches the display information between

navigation screen and source operation
screen.

Reset button

Number buttons

(control panel release) button

EN02-10_KD-NX901[E]fb.indd 10

05.3.17 1:59:32 PM

Summary of Contents for EXAD KD-NX901


































































































































Search results

Summary of Contents for EXAD KD-NX901

Reviews:

JVC EXAD KD-NX901, Instructions Manual, Page: 10 / 129

Search results

Summary of Contents for EXAD KD-NX901

Reviews: