JVC Everio GZ-HD7U Instructions Manual Download

Page: 70 / 84

Changing the Menu Settings (Continued)

Menus

Settings: [ ] = Factory-preset

GENERAL

DATE/TIME

Enables you to set whether to
display the current time on the
LCD monitor.

OFF

: The date/time does not appear.

[AUTO]

: The date/time appears for approx. 5 seconds in

the following cases.

•

When the power/mode switch is set from

OFF

STANDBY/ON

•

When playback starts

: The date/time is always displayed.

PRESET

Returns all the camera settings
to their default values.

EXECUTE

: Performs this function.

[CANCEL]

: Returns to the menu screen without

executing reset.

BRIGHT

Enables you to set the brightness
of the LCD monitor or viewfi nder.

Adjust the brightness of the display moving the set lever
to

, then press down.

DROP DETECTION

Prevents damage to the
HDD by turning off the power
automatically when the camera
detects that it has been dropped.

OFF

: Disables the function.

[ON]

: Activates the function.

To turn the unit on when the drop detection
worked, set the power/mode switch to

OFF

, and to

STANDBY/ON

again.

CAUTION

Setting this function to off increases the chances of
damaging the built-in hard disk if the camera is accidentally
dropped.

FOCUS ASSIST

When the focus assist function
is used, the borderline of the
focused subject is displayed in
the selected color.

[BLUE]

RED

GREEN

]

REMOTE

Turns reception of the operation
signal from the remote control
on/off.

OFF

: The camera does not receive the signal from the

remote control.

[ON]

: Enables operation with the remote control.

[

DEMO MODE

Introduces special features of
the camera when there is no
operation for about 3 minutes
during recording mode.

OFF

: Disables the function.

[ON]

: Activates the function.

NOTES

•

The demonstration only works when the AC adapter is

connected, not with the battery.

•

If an SD card is in the camera, demonstration will not take

place even if this mode is set to [ON].

OPERATION SOUND

Enables you to set the operation
sound or turn the operation
sound on/off.

OFF

: Turns off the operation sound.

[MELODY]

: The melody sounds when any operation is

performed.

TALLY LAMP

Set whether to light the tally lamp
while shooting.

OFF

: Unlit.

[ON]

: Lit.

Summary of Contents for Everio GZ-HD7U





















































































Search results

Summary of Contents for Everio GZ-HD7U

Reviews:

Related manuals for Everio GZ-HD7U

Brands by name

Popular brands

JVC Everio GZ-HD7U, Instructions Manual

Search results

Summary of Contents for Everio GZ-HD7U

Reviews:

Related manuals for Everio GZ-HD7U

Brands by name

Popular brands