Charging the Battery Pack
(Base)
To detach the battery pack
Charging finished:
Goes out
Charging in progress:
Blinks
Charging Lamp
Plug in the power.
To AC Outlet
(110 V to 240 V)
AC Adapter
Cover
Connect the DC
connector.
Mark
Align the top of the battery
with the mark on this unit,
and slide in until the battery
clicks into place.
The battery pack is not
charged at the time of
purchase.
Attach the battery pack.
If the charging lamp is blinking fast or
twice, refer to the “Caution” below.
CAUTION
Be sure to use JVC battery packs.
0
If you use any other battery packs besides JVC battery packs, safety and
performance cannot be guaranteed.
0
Charging time: Approx. 2 h 50 m (using supplied battery pack)
* The charging time is when the unit is used at 25°C . If the battery pack is charged outside
the room temperature range of 10°C to 35°C, charging may take a longer time or it may
not start. CHARGE lamp blinks 2 times in a slow cycle for notification if the battery charge
does not start. In such case, leave the battery for a while, and charge the battery again.
Also, please note that the recordable and playable time may be shortened under some
usage conditions, such as at low temperature.
0
In case of the battery is not used for a long period of time or at the time of purchase,
the charging time will be longer than usual.
If you use the battery before charging is completed, the power may not turned on.
Please use after charging is completed.
0
If malfunctions (overcurrent, overvoltage, transmission error, etc) occur, or if any
battery manufactured other than JVC is attempted for battery charge, charging stops.
In these cases, the CHARGE lamp blinks quickly for notification.
0
You can record or play back videos while the AC adapter is connected. (Battery
charging cannot be performed during recording or playback.)
Remove the battery when the unit is to be used for a long time. Performance of the
battery may drop if it is left attached to the unit.
EN
5
